- `stt`: one realtime transcription session per utterance on the speech
server's url, opened at `listening` true or the first chunk, committed at
false; a whole clip goes to /v1/audio/transcriptions. Returns at once and
publishes `partial` and `text` when the server answers.
- `tts`: one /v1/audio/speech call per sentence, cached by voice and text in
node state; a reference is marked `append` while earlier ones still play.
- wren: `reply` says what was applied, `unhandled` carries the prompt when
nothing was. The install hint names the git pin (PyPI's `wren` is another
package).
- ai/client: transcribe, speak and transcribe_stream beside stream_completion.
- A device socket publishes scalar `in` ports as {"type": "publish"} text,
in order with its binary frames.
- Pipeline.publish walks only what its values reach: a node downstream of a
consumer that published nothing no longer runs again (wren re-acted on
every microphone chunk).
- `service` node type: command, port, worker label, health path, env and
weights (an artifact digest the worker fetches as {weights}). Its flow
starts it; it restarts with backoff, reads degraded while starting or
without a worker and down after three starts that never got healthy, and
publishes http://<worker>:<port> once /health answers 200, "" when it ends.
- Worker protocol 3: a `serve` call, every call in its own process group,
killed when the engine ends the call, the socket drops or the agent gets
SIGTERM. `--service-host` overrides the address the engine sees.
- Services and compiles take no `--parallel` slot, and a flow's detail is
built off the event loop, so a save no longer stalls the engine.
A device reports its board, screen, camera and ports from its own
credential (16 KB, schema 1, replacing the last report), and the flows
are validated against it again. The node panel turns a reported port's
config schema into a form, a reported screen is a canvas preset and a
touch screen's first report turns Touch friendly on. An offline device
node is degraded: amber on the canvas, a warning on Home, never a fault.
- flow/nodes/device.py: `device` node with params `device` and `config`;
provides the device's `in` ports, requires its `out` ports without
waking anything, never run (Node.passive), down "Offline" from presence
- DeviceDef.io and DevicePort go; GET /devices/{id} computes `io` and
`bindings` from the device nodes of published flows, in a fixed order,
cached by FlowStore.revision; the credential's scope comes from them
- issues `unknown_device` and `device_port` (wired twice; against a report
the wrong direction or dtype, or unlisted as advisory), rechecked when a
device is created or deleted; ValidationIssue.advisory is a field
- a device publishing on a bound port is credited to its node by the
server; the panel endpoint kind is gone from `_endpoints` and the canvas
- a rebuild that moves a device's bindings sends `dashboard_changed` with
an empty name, which the firmware refetches on
- startup moves each device's `io` rows into device nodes in the flows
declaring their messages, draft and published, one commit; rows no
flow declares are logged and left out
- frontend: Device node settings (device, Publishes, Follows, a port
picker from a report), palette shortcuts per reported port, DeviceDetail
lists bindings with "Use in flow" in place of the I/O editor
- docs: devices, flow editor, node types, issues, API
The backend image now builds the SPA and serves it on the API's own origin
(fluksio/spa.py), so an instance is a single container with no proxy, DNS,
port 80 or .env: `docker compose up -d` with the new compose.yml runs it on
localhost:8080. It starts on fluksio serve (persisted secret key, first
admin printed once) and brings its own Redis when REDIS_HOST is unset.
Slimmer: python:3.13-slim, no dev group, uv once, fastapi without the cloud
CLI. Optional features are per-feature extras (mqtt, influx, email, sentry,
ml, server for all) picked with the EXTRAS build argument; numpy moved to
`ml`. ffmpeg left the image for imageio-ffmpeg via the Modules screen.
The operator stack runs the same image with app. and api. routed to it; the
nginx frontend service, the LAN nginx proxy and DOMAIN in the backend are
gone, and the MCP issuer is FRONTEND_HOST.
The connector now serves /mcp, its OAuth documents and /hooks/ besides
/api/v1/, refuses any dot segment (httpx resolves them, which carried
/api/v1/../../mcp onto the MCP mount), addresses calls to the hub's host,
and bridges served sockets by calling the app with a websocket scope.
A hook without a secret answers the tunnel with the 404 (or 1008) of a
wrong secret. Requests through the hub get the hub's issuer, resource and
consent page in the OAuth metadata and the 401, and the MCP host check
admits the hub while enrolled.
mqtt and http take websocket's vocabulary: their Mode is LISTENER/SENDER,
default names read mqtt_listener_… and http_listener_…, and mqtt's
publish_queue_size is send_queue_size. No alias stays behind, so the flow
store rewrites the old setting in every published and draft mqtt node when it
opens, in the same migration as trigger → debounce. Every mqtt and http
setting carries a one-line description for the editor, and the node-types
reference uses one wording for direction and says that an http sender
publishes a JSON object response on its outputs.
The store rewrites `"type": "trigger"` to `debounce` in every published and
draft flow when it opens, bumps the version and commits once. No alias stays
behind, so `trigger` is now an unknown type.
ws:// and wss:// URLs dial out and hold a supervised connection; a path is
served under /hooks/<flow>/ with an optional secret. Outputs only listen,
inputs send. Frames are JSON keyed by port, with json_key and on_connect.
Writing node source, installing modules and any flow save that adds,
retypes or repoints a code node (Function, Command), edits a Command
node's settings or changes a node's resources.env now answer 403 for
everyone but a superuser. MCP tools and the assistant reach the same
routes, so they inherit the gate. Node types report runs_code.
The editor shows code read-only with a note, disables a Command node's
settings, leaves code nodes and reusable nodes out of the palette and
paste, and the Modules page offers no install.
The port name follows the message until it is typed by hand, and clearing
it follows again. The second line holds the message, so a list port's item
type no longer squeezes the name.
The site read as a design journal: rationale paragraphs, hedges
("deliberately", "on purpose", "genuinely"), meta-commentary about the docs
themselves, and one em-dash every ten lines carrying an aside.
Roughly twenty rationale blocks are gone or reduced to what a reader needs
in order to use the thing. Em-dashes go from 507 to 135, and what is left is
structural rather than prose: list and definition separators, table cells,
and four inside code blocks that quote what the CLI actually prints.
Also: api.example.com becomes api.fluksio.com (the emails stay, since
bootstrap.py really defaults to admin@example.com and RFC 2606 reserves it);
the mqtt table gains the two settings it had drifted behind on and inject's
wording matches the engine; llms.txt lists the two connector pages that were
in the nav but not in it; and the two device/device_policy notes now agree.
Builds clean under `zensical build --strict`.
Follows the portal: the noun is "instance" everywhere the app says it —
UI strings, CLI output, error details, docs and comments. The wire keys
(`instance_id`, `instance_token`) and the hub route this calls move with it.
An existing cloud.json is adopted rather than refused: without the key
alias the dataclass fails to parse, which the caller swallows and reads as
"never enrolled" instead of "reconnect".
`instance_key` on a node type becomes `target_key`. It means the outside
thing a node points at, which is a different sense of the word, and keeping
both would put two meanings of "instance" in one codebase.
Say on the querying-chart page that a flow doing its own binning has to drop
the newest bucket, as the observability endpoints already do, and make plain
that `inject` is the scheduler while `trigger` is a debounce and hold.
The timer thread promoted due work on a fixed one-second tick, so every
delayed item was 0-1000ms late whatever the load — measured on the house
at 705ms mean on a rollershutter stop, which is 2-4% of a 26-second
travel and accumulates in the position the motor node believes it is at.
It now sleeps to the soonest deadline and is woken when a nearer one is
scheduled, which measures 0.9ms end to end through Redis.
A promoted timer also went to the back of the queue. It goes into a due
lane of its own that `claim` reads first, so work that has waited out a
deadline is not held up by work that is merely queued.
Beside it, in the same code: seeding a message now bumps its version, so
a re-put flow's synchronous nodes no longer wait forever on a value that
is sitting in state; the consumer group drops the consumers of engines
that are gone (138 had accumulated on this installation); and the cast
that closes the long-standing `xclaim` mypy error.
Adds reference/connector-contract.md and code/connectors.md to the site, with
the node-type reference finally linking the contract it describes. Strict
build passes.
Four small things, each with a device behind it.
An MQTT filter now routes what it subscribed to. `+` and `#` reached the
broker and were then looked up in an exact-match dict, so every message a
wildcard subscription received was dropped in silence.
`json_key` lifts a value out of the object a device wraps it in — Victron
publishes `{"value": 47}` on every path, which was otherwise a Python node
per port.
The trigger node learned `passthrough` and `wait_port`, because how long to
wait can be a value rather than a constant: a rollershutter takes 26 seconds
up and 28 down. A wait of zero sends nothing afterwards and still cancels
what the last message scheduled, which is how a stop is commanded once
instead of forever.
The HTTP sender takes fixed `query` parameters, so an API key is a secret
reference rather than a message on the canvas, and `send_inputs` off for a
request whose inputs are only a trigger.
Also: `delay` accepts fractional seconds, and `TZ` reaches the container, so
a cron expression means local time. Left unset it is UTC, as before.
A zensical site under docs/, served by a new `docs` compose service behind
Traefik, built with --strict in CI. Same pattern the sibling n3xd workspace
uses.
Getting started splits the way the landing page does — one path is
`pip install fluksio` and a training script, the other is a Docker stack and
an afternoon in the browser — because the two audiences will not spend the same
amount of time. Everything after that is shared: the concepts, the web
interface (app and portal), the CLI and the API, and a reference for node types,
payload types and configuration.
The three flow guides move here from the docs submodule rather than being
copied, so there is one version of them.
Styling mirrors DESIGN-GUIDELINES.md: the app's token palette remapped onto
Material's variables in both schemes, Inter, the 16px panel radius, and the one
terracotta accent spent on the facility lane of the audience split.
Melvin Strobl
stroblme