A chart that named no palette took the ramp in order, so three lines drew
slots 1, 2 and 3 — adjacent steps of a ramp that carries identity by lightness
alone, which at a 2px stroke read as close to one picture. Each count now
takes the slots furthest apart that the ramp allows: 1 -> 1, 2 -> 1/5,
3 -> 1/3/5, 4 -> 1/2/4/5. Five lines are unchanged.
Moving a default is only safe because the mechanism around it is inert: a
palette a dashboard wrote down is still drawn exactly as written, so no stored
document means anything different than it did. `palette.check.ts` now pins the
spread table and says which of the two properties is permanent.
An unnamed palette is empty rather than the whole ramp, so the settings panel
shows nothing picked when a dashboard is on automatic — and deselecting the
last colour is now the way back to it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016ZeGnqVsf5VHQqvz4HdUhN
React Flow stamps `colorMode` on its wrapper as a class and defaults it to
`light`. The app's own token scopes are named `.light` / `.dark` — the classes
that let a dashboard be forced to one theme inside a shell on the other — so
every canvas was silently redeclaring the light palette on its own subtree:
white node cards and a white canvas in dark mode, with the inherited
`--foreground` text still near-white and therefore invisible. Home's neurons
had the same fault, drawn with white ring gaps and the light `--primary`.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016ZeGnqVsf5VHQqvz4HdUhN
The comment said the canvas follows the theme without a `colorMode` prop. It
does not — React Flow stamps that prop on the wrapper as a class and defaults
it to `light`, which collided with the app's own `.light` token scope and
re-themed the whole canvas. The prop landed in 4e1898a; this is its reason.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016ZeGnqVsf5VHQqvz4HdUhN
Reserving a slot for all three status controls left 72px for a node's title,
against about 140px before. Only the stop button and the dot come and go on
their own; the traceback button appears when a node newly fails and goes when
someone acknowledges it, which is a thing to notice rather than a flicker. It
goes back in the row, and the title gets 106px.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016ZeGnqVsf5VHQqvz4HdUhN
uPlot writes what `cursor.move` returns back into the value it hands in next
time and calls it again on every redraw — and a chart sets its data on every
render. The correction was therefore applied repeatedly: the cursor walked
left while the pointer stood still, and the position taken at mousedown no
longer matched the one held at mouseup, which uPlot reads as a drag and
answers by swallowing the click. That is what stopped a chart tile being
selectable in the dashboard editor.
The refiner now returns its previous answer unchanged when handed it back, so
a redraw is a no-op. Lifted out of the config as `cursorRefiner` so the branch
can be checked without a browser; `cursor.check.ts` replays uPlot's own
sequences, including the press-is-not-a-drag one that regressed.
The Playwright hover test now also asserts the cursor holds its place across a
redraw, which is what the first version missed.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016ZeGnqVsf5VHQqvz4HdUhN
A dashboard names the data colours its charts draw with: an ordered, distinct
subset of the `--chart-1…5` ramp, stored on the settings channel that already
carries `theme` and `locked`. No backend or client change — `SettingDef.value`
is free-form and a name this build does not wire up is left alone rather than
refused.
Naming none is the whole ramp, which resolves to the identical token per
series as the `--chart-${(index % 5) + 1}` charts drew with before, so every
existing dashboard is unaffected. `palette.check.ts` asserts that equivalence
rather than trusting it.
Distinct slots, not free assignment with repeats: only slot 1 against slot 5
clears 3:1 within the ramp, so two traces on one slot could not be told apart.
Status colour is deliberately outside the palette — a fault is `--destructive`
because of what it means, not because of where it sits.
The provider is mounted by the editor as well as the view, so picking a
palette repaints the charts beside the panel instead of describing them.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016ZeGnqVsf5VHQqvz4HdUhN
- A node's height follows the ports on its busiest side. It is a function of
the document, so `layoutGraph` reserves exactly what is drawn and nothing
measured is fed back into the layout.
- The three status controls now sit in slots that are there whether the
control is or not. A node running many times a second mounted and unmounted
the stop button on every execution, resizing the card each time.
- A port bound to another flow's message is drawn as a label, naming the node
at the far end and its type. Only the opposite direction was answered
before. The scan behind both is now cached on the store's commit counter
rather than reading every flow per request.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016ZeGnqVsf5VHQqvz4HdUhN
A dashboard canvas is CSS-scaled to fit its panel while uPlot maps the
pointer against its own unscaled plot width, so the cursor drifted further
right the further into a chart it went. A `cursor.move` refiner divides the
visual offset back into layout pixels; unscaled hosts get a no-op.
A querying chart's range picker moves onto the frame's title line through a
new `useHeaderSlot`, giving the plot back the row it spent. The editor's drag
handle is the header, so the picker is exempted from it.
Charts can be drawn as a monotone cubic spline — uPlot's own path builder,
monotone so a smoothed line never invents a reading between two real ones.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016ZeGnqVsf5VHQqvz4HdUhN
`--xy-connectionline-stroke` was never set, so the line dragged between two
ports took xyflow's `#b1b1b7` literal in both themes and was a hair thinner
than the edge it became. It is a selection-like state, so it takes `--primary`
and the canvas's own edge width.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016ZeGnqVsf5VHQqvz4HdUhN
--brain-decay 90s -> 150s and the wire floor 32% -> 16%, so a quiet
connection dims further and takes longer doing it. The pulse ring's inset
and band become custom properties (defaults unchanged for the editor's
card), and the neuron passes its own ring and gap so the arc runs the full
width of the gap; it moves after the disc, which otherwise paints over it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016ZeGnqVsf5VHQqvz4HdUhN
`flow.css` set `--xy-background-pattern-dots-color`, which nothing reads:
xyflow's `.react-flow__background-pattern.dots` reads
`--xy-background-pattern-color` and only falls back to the `-dots-color-default`
literal. The grid was therefore pinned to `#91919a` in both themes — and with no
`colorMode` prop the `.react-flow.dark` default never applies either, so it read
as a light-mode grid on a dark canvas.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016ZeGnqVsf5VHQqvz4HdUhN
Both screens the house is looked at on are 1280x800, so that is what the three
dashboards are laid out for: twelve columns of 96px, twelve rows of 51px, and
nothing past the bottom, because a panel does not scroll.
The motors are one control each instead of three buttons. A button could only
publish; a segmented control reads back as well — so the motor writes what it
is doing to the same message the control sets, and the segment that is held is
the direction it actually went. Up, Stop, Down for the shutters; Close/Open for
the window and In/Out for the awning, which is what those two are for.
A run stopped part way now leaves the position unknown rather than claiming the
target it never reached, so the next command in either direction moves it.
The preflight gained the two checks this needed. One runs each sample shape
past the port that would receive it. The other is arithmetic: every tile inside
the panel and none on top of another — both silent failures on a screen with no
scrollbar, and both caught before anything is written.
Sizes were settled by looking. A slider needs three rows or its tick labels
fall off; a status icon needs three or it loses the word under the glyph; a
gauge in two rows has no arc worth reading, so the battery is a bar on Home and
a gauge on Energy where there is height for one. A chart spends eighty pixels
on its chrome whatever it is given, so two of them read on this panel and three
did not — the temperature history is the one that went, and `history` still
answers for it.
`capture-panels.mjs` is how that was checked: the three panels at the screen's
own pixels, in both themes, reporting whether anything spilled.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A dashboard could only ever receive as a set of tiles. This adds the dashboard
itself as a receiver: `settings` maps a name to a value plus an optional
binding. Unbound, the setting is simply its value — a wall panel that is always
dark costs no flow. Bound, a flow drives it live and the value is the fallback.
Two settings are wired: `theme` (system/light/dark) and `locked` (read-only).
There is no schedule field on purpose — a node publishing to the bound message
on a cron is what a schedule is here, which is the point of a channel.
- `messages_for()` now walks a dashboard's bound settings as well as its
widgets' bindings. Without this a paired screen is refused its own theme
message, on the one surface the setting exists for; it bounds the socket too.
- `locked` is gated in `usePublish`, so every control inherits it, and each
control also draws itself disabled — a dead button reads as broken otherwise.
The panel surface says Read-only in the corner.
- The theme is a class on the dashboard's own surface, never the root: inside
the app shell it must not flip the chrome. `.light` gains the tokens `.dark`
already had (mirrored in the index repo) so both directions work on a subtree.
- Settings bindings are type-checked from the document alone, the rule widget
bindings follow, and mirrored on the server.
- A bound setting is drawn on the flow canvas as a dashboard-level endpoint.
- The demo's house flow now publishes `home.panel_theme`, which the demo
dashboard's theme binds to: the panel goes dark after sunset, at no tile cost.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018tULRZJUkZsw7rMJ3h4xvu
A custom hue ring — a conic gradient, not a canvas — with saturation and
brightness sliders beside or under it depending on the tile's shape, sized
for a wall panel and reachable from a keyboard. It publishes [h, s, v] by
default, which is what the reference installation's DMX encoders read, and
`format` switches that to [r, g, b] or "#rrggbb".
`usePublish` moves to its own module so a widget in a file of its own can
reach it without importing `widgets.tsx` back.
The editor only ever arranged the first section, so the demo's Home
dashboard lost 16 of its 25 widgets the moment it was edited. A page's
sections are now read as one arrangement — each pushed below the one
before it — and written back as one, which is the shape a dashboard was
already heading for: one dashboard, one canvas, and the panel rail for
the several-dashboards story. The page tabs that story made dead are
gone; PageDef/SectionDef stay in the schema and a page the editor does
not show round-trips untouched.
The row height derives from the canvas as the column width already did,
so the same arrangement is the same picture on a 7" panel as on a 4K
one. The uPlot rules move beside UplotChart, where a chart on Health is
styled without a dashboard having been visited first, and the bar's
readout travels on one property instead of jumping sides at 30%.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018tULRZJUkZsw7rMJ3h4xvu
- IconPicker replaces the three icon selects (rail icon, icon-widget rule,
"Otherwise"): the glyphs in a grid, and a button that clears back to none —
which a Radix SelectItem could never offer.
- ModePicker/StylePicker drop out in favour of a shared ui/Segmented, the same
sliding-thumb shape RangePicker and the widget-side control already wear.
- PanelRail draws no scrollbars at all: hiding them also takes back the gutter
a vertical bar claimed from a column exactly as wide as its buttons, which is
what pushed a horizontal bar under them.
- The panels dialog can re-pair one screen (POST /panels/{id}/unpair) without
deleting the panel it hangs on.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018tULRZJUkZsw7rMJ3h4xvu
- Home puts the dashboards beside the flows: two equal-height columns,
capped and scrollable, most recently worked on first. Each tile is a
schematic footprint built from the stored widget placements.
- Flows and dashboards can be picked by long press or ctrl-click; the
create button becomes a trash and one dialog covers the batch.
- The offline banner is drawn on the body so it centres on the viewport,
and the live socket now releases the offline latch a stray 503 set.
- A boot spinner before React's first commit, a router pending screen for
code-split pages, and skeletons where an empty list used to flash.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018tULRZJUkZsw7rMJ3h4xvu
An input widget published over HTTP and read the result back over the socket,
so between the two it drew the pre-publish value — a slider handle let go of
visibly snapped back. usePublish now holds the sent value until the echo
matches, the publish is refused, or 3 s pass, and every input widget (button,
switch, slider, input, dropdown) draws that instead of the live value.
A publish in flight pulses a primary ring over the tile: an absolutely
positioned, inert overlay, so nothing resizes or shifts. A refusal drops the
hold and toasts, naming the message. Success stays silent.
The slider also draws its own scale — min, max and a few labelled stops that
land on steps — replacing the unlabelled datalist marks that dropped out past
fifty steps.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018tULRZJUkZsw7rMJ3h4xvu
The sibling index frontend now prerenders its public pages, where the initial
state read of localStorage and the matchMedia probe both run with no browser
present. The design contract keeps this file byte-identical across the two
repos, so the guards land here in the same change.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
`make lint-frontend` was `biome check --write --unsafe ./` — a lint target that
reformatted the whole tree rather than checking it, which is why every parallel
change in this repo has had to work around it. `lint` checks now and a new
`format` writes. The pre-commit hook and CI needed no edit at all: both call
`bun run lint`, so they became checks the moment its meaning changed.
`app/Makefile` assigned DOMAIN from .env, and a plain assignment beats an
inherited environment variable and is not exported — so `cd app && make
dev-local` served localhost while the same checkout's tests targeted the
configured domain. `export DOMAIN ?=` gives the lattice that was intended:
command line, then environment, then .env.
Alongside: the backend's htmlcov bind mount created that directory as root, so
`make test-backend` died on the coverage step after every test had passed,
which reads like a test failure and is not one. The alerts screen's copy of
ALERTING_EVENTS is now checked by a test rather than trusted. And the shard
comment claimed two spec files where there are nine.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uq8mtNb97A7praJLyeEYgs
A node's error cleared the moment it ran again, so a failure that genuinely
fired an alert could leave no trace on the canvas by the time anyone looked.
The engine records it now — on the node's status, so it survives a reload and
every client agrees — and reading the traceback is what clears it. The seam is
the event bus, which is where every failing path already meets: a queued live
run, an explicit run, a preview, and a single triggered node all publish
`node_error`, while the controller's own observer would have seen only one of
them.
That was half the confusion. The other half: clicking a failed neuron on Home
often landed on a flow where everything looked fine. Nodes merge into one
neuron by instance key — every InfluxDB node pointing at the same bucket is one
neuron — and the click went to whichever flow contributed a member first, not
the one that failed. It now goes to the failing member and selects it, and the
canvas marks a failing node rather than leaving it to the dot alone.
The inject node emitted one payload to every port it declared, whatever their
types, so an inject on a bool port carrying the text "true" raised at publish
time. Each port gets its own field now, typed and parsed by that port's dtype,
and remembers what it last sent. A port that is renamed carries its value with
it; one that is removed takes its value with it. An inject written before this
keeps emitting exactly what it did.
The derived-cron chip also appeared on the delay node, where `interval` is a
rate limit and a schedule derived from it means nothing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uq8mtNb97A7praJLyeEYgs
Shrinking a dashboard's canvas silently clipped whatever now fell past the
bottom edge: `maxRows` constrains a drag and nothing else, so a stored placement
is corrected against the column count alone. Nothing warned, and nothing offered
a way out.
The remedy is a notice rather than a reflow, because the canvas height is
written on every keystroke — typing 400 passes through 4 and 40, and anything
that moved widgets would flatten the arrangement while the number was still
being typed. The notice carries the reflow as its one button, and packing is
sideways because the grid already compacts vertically: nothing below the canvas
has room above it.
Dropping a widget also selected it, which opened its panel, which rescaled the
canvas under the pointer. The drag handle was simply missing from the selector
that already exempts the resize handle — which is why resizing never had this
problem.
Also: an icon rule's caption could only be set through the API, and the panel
rail drew two letters where a dashboard can now carry a lucide icon.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uq8mtNb97A7praJLyeEYgs
A dashboard went live the moment it was created — an empty document straight to
the panels — while a new flow starts as a draft. It now works the way flows do:
published means `dashboard.json` exists, so every dashboard on every running
installation is already published and nothing needs migrating. Only the ones
created from here on start as drafts.
Mirroring FlowStore turned up a latent 500: discarding the draft of a dashboard
that had never been published unlinked its only file, and the read that followed
raised out of a 200 handler. It answers 400 now, the way a flow does.
Publishing all of them was 2N requests, because a publish has to name the
version it expects and the summaries did not carry one. They do now — and so do
the flow summaries, which had the same defect nobody had written down.
A panel had no way to hear about any of this. A publish, or a change to which
dashboards a panel carries, now puts one event on the bus and the screen
refetches what changed: no reload, so a wall display never blanks or asks for
its credential again. The subtle half is that a socket's message allowlist was
computed once at handshake — a reassigned panel would have fetched its new
document and then shown tiles that never updated.
The panels dialog logged non-superusers out. Every write in it needs a
superuser, not only the checkboxes the report mentioned, so the dialog is
read-only for everyone else. The logout itself was `main.tsx` treating 403 as a
dead session, against the contract deps.py spells out: only a 401 ends a
session, and a 403 now says so rather than silently signing someone out.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uq8mtNb97A7praJLyeEYgs
Remote access used to collapse every portal session onto the account that
performed the enrolment. That was the only thing it could do while nothing
here knew who was at the other end, and it is why letting a second person
in meant handing them the first one's account.
`user.portal_sub` is where a portal identity meets a local one: set for the
enrolling superuser at enrolment, and for each person a superuser admits
afterwards through Settings -> Remote access -> Add remote user. The code
they type comes from the newcomer's own portal account, and it is redeemed
against the hub with this installation's tunnel credential rather than with
a portal session, so being let in is not itself the power to let others in.
The account created is never a superuser, which closes the same door from
this side.
A proxy token now resolves through that mapping and nowhere else. An
identity nobody mapped resolves to no user rather than falling back on the
enroller, so deleting the local row under Admin -> Users is the whole of
the revocation: it bites on a credential already in flight, and it does not
wait on the portal being reachable to be told. Telling the portal is best
effort for exactly that reason.
The cost is stated where it lands, in DEPLOY.md: an installation enrolled
before this has no mapping, so its owner reconnects once with a fresh code.
Panels and the health summary still act as the enrolling account - neither
of them is a person, and neither gained a way to name one.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Three things moved the viewport independently — the shape-fit effect, focusNode,
and React Flow's own fitView prop — so a fourth for "centre the node I just
selected" would have been a fourth party to the argument. There is one effect
now, and which branch it takes is decided by what changed rather than by what is
true: selecting a node brings that node into the lane the panel leaves, and
every other change — new wiring, a new endpoint, a panel opening — re-fits the
whole flow into the same lane. A selection centres once, so the port edits that
follow re-fit around it, which is what makes a new edge's far end visible.
The refit triggers on the edge count, not the bindings key: that key changes on
every keystroke in a message-name field, and refitting per character is not what
"an edge was created" means.
renderedNodes overwrote xyflow's own `selected` flag, so a box-selection of
several nodes was invisible even though delete and copy acted on all of them.
The logs panel was a popover anchored on its own button, which is why it sat off
centre, hugged the button and closed on any outside click. It is a plain surface
above the dock now, and the button is stateful. Escape still closes it.
Expanding a node's editor gives the panel the whole inset and puts the code on
the left with the settings beside it, while the toolbar and the flow name
translate off screen. Narrowing the window past `md` gives the room back — the
sheet it becomes has no second column to hold.
The zoom buttons are gone: there is a mouse, or there is a pinch.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uq8mtNb97A7praJLyeEYgs
A bar drew its nested reading on top of the outer one in --chart-5, which
measures 2.53:1 against --primary and lost the 3:1 guideline for non-text. The
readings now partition the fill end to end, up to three of them, in a token of
their own: --primary-nested, the primary hue a few steps deeper, 3.14:1 light
and 3.12:1 dark. It cannot also clear 3:1 against --muted — in dark those two
are 5.82:1 apart and a colour 3:1 from both would need a 9:1 gap — so a segment
is drawn inside a gutter of outer fill rather than ever bordering the track,
which is what separates neighbours too, and what caps the count at three. A
nested value larger than its outer used to spill onto the track; it is clamped.
`inner` still reads as a single binding, so no dashboard needs migrating.
On a phone, .widget-grid took its width from the widest thing any widget held —
a truncating flex item still offers its whole unwrapped line as a min-content
contribution — and a handful of widgets had no floor of their own: the uPlot
legend is a table, a fieldset carries min-inline-size: min-content from the UA
sheet, and buttons are whitespace-nowrap. Each is capped now. A widget's body
scrolls rather than clipping, so long text stops painting over the title.
Gauges and bars move between readings instead of jumping, and a segmented
control slides one thumb rather than recolouring cells. The gauge arc is drawn
whole and revealed by its dash, because `d` cannot be transitioned.
UplotChart pushed new readings only when the point count changed, so once a
rolling window was full a refetch left the old values on screen.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uq8mtNb97A7praJLyeEYgs
/observability/timeseries and /flows read every metric_minute row in the window
and folded them in Python, so the 7d preset pulled a week of rows on each 30 s
poll. date_bin() does the binning now — the row count drops to the slices asked
for, and to flows × 60 for the sparklines. A window of zero hours used to divide
by nothing and answer 500; windows are clamped to an hour at the low end and to
the retention period at the high end, past which there is nothing to find.
/observability/runs returns {data, count} rather than a bare list, so a minute
busier than the 200-row cap says so instead of quietly showing its newest 200.
The count is only queried when the page comes back full, which keeps the poll
from handing back what the fold just saved.
failures_24h leaves the summary — the Home tile counts errors over the selected
window from the rollups, and nothing had read the field since.
Deleting a flow now takes its Run rows and their nodes, metrics and artifacts
with it. This lives in the route rather than in forget_flow because renaming a
flow calls that too, and a rename must keep its history. The observability
rollups stay: they are the record of what ran, and retention already prunes them.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uq8mtNb97A7praJLyeEYgs
Three things the security pass on the portal pairing turned up. The first two
were already true of a screen on the local network; what changed is that a
panel credential is now presentable from the internet, which is what makes
them worth closing rather than recording.
The artifact endpoint authenticates for itself, because a worker's credential
has to open it and that token is no use anywhere else. It resolved the caller
without handing over the request, so the one credential that is scoped by
route was judged by no route at all — a panel could read and write the store
as whoever approved it. It passes the request it already holds now.
The websocket has no route to judge either, and there the bound has to be on
what is sent: a panel is given the values its own dashboards draw and nothing
else — no node status, no logs, no shape of the graph. The keys stay in the
message, emptied, because a screen on a wall runs the bundle it was paired
with. `messages_for` reads that set off the published dashboards, and is the
walk the `/messages/` allowlist has wanted for a while.
And locality is no longer a header anyone can type. The marker the connector
stamps is a value minted per process, so reaching this API directly cannot buy
a device the credential meant for one that cannot reach it at all.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017F9RnYCJgASuBTcAjxmnsp
A screen somewhere this installation is not reachable from asks the portal for
a code instead, and the portal mints its credential — because a token signed
here is one such a device could never present.
Where it was minted changes nothing about what it may do. The panel gate moved
off the branch that decodes a local panel token and onto whatever claims name
a panel, so the portal's and this installation's are bounded by the same check
against the same panel's dashboards. A token of that scope naming no panel is
refused rather than left holding the account it borrows.
The connector marks what arrives on its socket, since that is the only thing
that makes it true, and the approval screen now names what is holding a code —
approving adopts whatever answers, so it is worth a look first.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017F9RnYCJgASuBTcAjxmnsp
A sweep against the code. Removed as resolved: the worker pool's `_running`
is keyed by (run, node) now, `WorkItem.kind` documents only the three kinds
that exist, `routeTree.gen.ts` matches its generator, and the host's Node is
well past the version the Vite 7 note was about. Removed as disproved: the
collector's redelivery branch is reachable — Redis reclaims an entry this
process is still running.
Corrected: the demo places six of the fifteen node types, not thirteen — the
count was the widget types. Narrowed to what is left: the header/config sync
now covers settings but only on an untouched scaffold and only one way; a
declared flow input is what the dashboard-input node asked for; the flow
boundary already refits the canvas where node ports do not.
The Playwright hazard is not resolved — both names still resolve to
production — and the fix as written is incomplete: `VITE_API_URL` has to be
overridden to `http://` or every setup call fails the TLS handshake.
Also: one `asText` instead of two, and the queue docstring no longer refers
to a node item that never existed.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NUb8YpL2s3gmN9WTACTt4q
A flow's inputs are the messages it takes from outside — a dashboard control,
a run, the API — and its outputs are what a batch run reports. Both existed in
the document and in the engine, and neither had any UI: the values looked
hard-coded on the canvas and the Run button always used the declared defaults.
The canvas now draws each as a labelled endpoint, the way it already draws a
dashboard tile or another flow, skipping an input something else already
accounts for. The flow panel edits them — mode, name, type, starting value,
and for a live flow the value it currently holds with a way to put a new one
in. Pressing Run on a batch flow asks for its parameters first.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NUb8YpL2s3gmN9WTACTt4q
A python node's settings are constants of its own function, so they are passed
the way its ports are: by name. The controller binds them to the compiled
function, the `params` field is gone from the worker and remote protocols, and
a setting sharing a port's name is reported as a node error rather than
shadowing it. The panel's scaffold follows suit and keeps the header in step
with both ports and settings.
The demo's `pace` moves from a flow input to a setting of the training node,
which is what it always was.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NUb8YpL2s3gmN9WTACTt4q
Both links out of the dashboard editor were built root-relative, so a portal
serving the app under `/i/{id}` got a URL to itself: the hub has no route
there and answers a bare 404. That is what a device link and "open what a
wall panel sees" both landed on.
They want different answers. The view link is for the person already looking,
so it takes the router's basepath — `appPath` in `lib/portal` is the same
prefix the router applies to every `Link`, for the places that step outside
it. The device link is for a screen, which cannot go through the portal at
all: the shell is served only to a portal session, and the credential that
page carries is the portal's rather than the panel's. So the server now says
where it answers, and `FRONTEND_HOST` is that answer — the same setting the
password-reset links already use.
Also fixes the panel branch in the query error handler, which compared a raw
pathname and so never fired under a portal.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AHpLJHozysQXjsxAyU1WHj
A panel is one screen and the ordered set of whole dashboards it shows, so a
hallway tablet and a workshop tablet carry different sets without either
dashboard knowing about the other. More than one and the device draws a rail
to switch between them — the same rail the editor puts on screen, because the
wall has it and it takes room off the canvas.
A screen has no keyboard, so it pairs rather than logs in: it shows a
six-character code, somebody approves it against a panel from the dashboards
overview, and the credential that mints reaches that panel's published
dashboards and the message endpoints its widgets speak, and nothing else.
Deleting the panel revokes it.
Closes the per-device view and the kiosk credential; supersedes the
multi-page/multi-section UI, since a page is now a dashboard of its own.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AHpLJHozysQXjsxAyU1WHj
Give the Home flow-activity name cell a `sm:min-w-32` floor beside its
`max-w-0` cap, so an ordinary name reads in full where there is room
while the phone keeps today's truncation. Name the bar widget's nested
reading by its port rather than its qualified message. Correct
`MarkdownWidget`'s docstring to the subset it actually renders.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SKL7sUgNWhukDEz95vSMQv
The arc was one-shot feedback for an emit, so a node that works for minutes
showed nothing after the first half second. A run now holds the ring on the
node and laps it until the node stops.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SKL7sUgNWhukDEz95vSMQv
Reaching Home from another page builds its charts in the same commit their
theme effect first fires in, with the readings already cached. uPlot ranges its
scales in a microtask, so `redraw()` re-set the x scale from the chart's own —
still empty — bounds before that ran, and the pending range taken from the data
was lost: axes without ticks, no lines, and no way back but the range control,
which rebuilds the chart. Redrawing without the paths is all a colour swap
needs and leaves the scales alone.
The cards also carried "Nothing has run yet." while the first readings were
still on their way; they now carry the skeleton the rest of Home uses.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SKL7sUgNWhukDEz95vSMQv
The JSON preview capped a ScrollArea rather than the pre inside it. Radix
sizes that viewport in percent, which resolves to the content's own height
against a box carrying only a max-height, so a list or dict of any length
spilled out of the node panel and the edge popover and painted over the
sections below.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SKL7sUgNWhukDEz95vSMQv
React Flow's selection changes had nowhere to go: the canvas passed
edges but no onEdgesChange, so no edge ever carried .selected and both
the selected-edge stroke and its rest colour were unreachable. The edges
are derived from the bindings, so the selected ids are held on their own
and marked on after the layout has had the array — a rebuild cannot drop
the selection, and selecting cannot make the graph lay itself out again.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SKL7sUgNWhukDEz95vSMQv
The socket belonged to whichever hook instance ran its effect first. Passive
effects run children before parents, so on Home that was the brain graph rather
than the shell: navigating to a sibling route unmounted the graph, which closed
the socket, while the shell kept the reference count above zero. From there the
page was deaf for the rest of its life, with nothing left to reconnect it.
A module-level connection with a real refcount replaces it — connect on the
first subscriber, disconnect on the last — and the hook is a thin subscription
with the same signature, correct under StrictMode's mount/unmount/mount.
A 1008 now reconnects instead of returning silently: the token is read afresh
per attempt, and three consecutive rejections fall through to the caller's auth
handler so a revoked session surfaces rather than spins.
The snapshot's emit counts are read into a store of their own, apart from the
live count, so a graph that connects into a busy engine is drawn as busy without
every neuron claiming it just fired. The neuron and edge pulses now key off a
change seen while they were mounted, so returning to Home no longer replays
every emission of the session.
Home gets a live indicator for the case none of this can fix: quiet while the
socket is up, and named in words when it is down, since HTTP polling keeps the
rest of the page looking current.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HTsT1isxUjw5gtkJk8WhuA
The ring hung off the node itself, and `inset` on an absolute child
resolves against the padding box — so on the brain's thick status ring it
landed inside the outer edge and painted over the status the ring carries.
Both node shapes now hang it off a border-less wrapper, where the same
offsets clear the rim whatever border the node draws (measured: 4px on all
four sides, on a 1px card border and a 7px neuron ring alike).
The shape is a conic-gradient arc masked to the padding band, running one
lap in `--duration-pulse` and going out on the way past.
Note: BrainNode.tsx also carries an unrelated in-flight change from a
concurrent session (the `seen` ref gating the pulse on a real emit); the
two could not be separated in one file.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The four widget types added this round had renderers but no way to configure
them. The panel now offers a bar's nested reading, unit and range (no step —
that is a slider's), the forecast's item count on the agenda's field, a chart's
y axis title beside its y range, and the icon's mapping editor: a value, a
glyph and a colour per row, first match wins, with a fallback glyph below.
Adds tests/widgets.spec.ts, which asserts each of them on /view: the nested bar
inside its outer fill, the glyph following the message, five forecast columns
fading outwards, a clock that reads the wall without being flagged unbound,
a segmented control and a latching button reading back what they published,
and an unbound tile that says so instead of taking the page down. The axis
title is drawn into uPlot's canvas, so it is checked by panel round-trip.
mobile.spec.ts grows a bar and a forecast so the width check covers them.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HTsT1isxUjw5gtkJk8WhuA
A port with `stream` set publishes repeatedly during one execution, and
until now nothing on the canvas said so. `deriveEdges` carries the flag
from the producing `MessageSpec` onto the edge, `LiveEdge` turns it into
an `edge-stream` class, and the class draws a dashed stroke whose offset
marches toward the target. The pulse still lands on top: both animations
share one declaration when a value arrives on a streaming edge.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HTsT1isxUjw5gtkJk8WhuA
The editor's mount-time fitView animated from React Flow's default viewport,
which read as the graph swiping in from the corner on every open. The first
fit is instant now, later ones stay animated, and a scaleIn wrapper gives the
same entrance the brain view has — with a re-measure on completion so the
handle bounds are not stored mid-scale.
Home only renders the brain band once some flow has nodes, so a fresh install
no longer reserves a screenful of empty space above the flows card.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HTsT1isxUjw5gtkJk8WhuA
stroblmeandClaude Opus 5