A dashboard canvas is CSS-scaled to fit its panel while uPlot maps the
pointer against its own unscaled plot width, so the cursor drifted further
right the further into a chart it went. A `cursor.move` refiner divides the
visual offset back into layout pixels; unscaled hosts get a no-op.
A querying chart's range picker moves onto the frame's title line through a
new `useHeaderSlot`, giving the plot back the row it spent. The editor's drag
handle is the header, so the picker is exempted from it.
Charts can be drawn as a monotone cubic spline — uPlot's own path builder,
monotone so a smoothed line never invents a reading between two real ones.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016ZeGnqVsf5VHQqvz4HdUhN
A node's error cleared the moment it ran again, so a failure that genuinely
fired an alert could leave no trace on the canvas by the time anyone looked.
The engine records it now — on the node's status, so it survives a reload and
every client agrees — and reading the traceback is what clears it. The seam is
the event bus, which is where every failing path already meets: a queued live
run, an explicit run, a preview, and a single triggered node all publish
`node_error`, while the controller's own observer would have seen only one of
them.
That was half the confusion. The other half: clicking a failed neuron on Home
often landed on a flow where everything looked fine. Nodes merge into one
neuron by instance key — every InfluxDB node pointing at the same bucket is one
neuron — and the click went to whichever flow contributed a member first, not
the one that failed. It now goes to the failing member and selects it, and the
canvas marks a failing node rather than leaving it to the dot alone.
The inject node emitted one payload to every port it declared, whatever their
types, so an inject on a bool port carrying the text "true" raised at publish
time. Each port gets its own field now, typed and parsed by that port's dtype,
and remembers what it last sent. A port that is renamed carries its value with
it; one that is removed takes its value with it. An inject written before this
keeps emitting exactly what it did.
The derived-cron chip also appeared on the delay node, where `interval` is a
rate limit and a schedule derived from it means nothing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uq8mtNb97A7praJLyeEYgs
Shrinking a dashboard's canvas silently clipped whatever now fell past the
bottom edge: `maxRows` constrains a drag and nothing else, so a stored placement
is corrected against the column count alone. Nothing warned, and nothing offered
a way out.
The remedy is a notice rather than a reflow, because the canvas height is
written on every keystroke — typing 400 passes through 4 and 40, and anything
that moved widgets would flatten the arrangement while the number was still
being typed. The notice carries the reflow as its one button, and packing is
sideways because the grid already compacts vertically: nothing below the canvas
has room above it.
Dropping a widget also selected it, which opened its panel, which rescaled the
canvas under the pointer. The drag handle was simply missing from the selector
that already exempts the resize handle — which is why resizing never had this
problem.
Also: an icon rule's caption could only be set through the API, and the panel
rail drew two letters where a dashboard can now carry a lucide icon.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uq8mtNb97A7praJLyeEYgs
A dashboard went live the moment it was created — an empty document straight to
the panels — while a new flow starts as a draft. It now works the way flows do:
published means `dashboard.json` exists, so every dashboard on every running
installation is already published and nothing needs migrating. Only the ones
created from here on start as drafts.
Mirroring FlowStore turned up a latent 500: discarding the draft of a dashboard
that had never been published unlinked its only file, and the read that followed
raised out of a 200 handler. It answers 400 now, the way a flow does.
Publishing all of them was 2N requests, because a publish has to name the
version it expects and the summaries did not carry one. They do now — and so do
the flow summaries, which had the same defect nobody had written down.
A panel had no way to hear about any of this. A publish, or a change to which
dashboards a panel carries, now puts one event on the bus and the screen
refetches what changed: no reload, so a wall display never blanks or asks for
its credential again. The subtle half is that a socket's message allowlist was
computed once at handshake — a reassigned panel would have fetched its new
document and then shown tiles that never updated.
The panels dialog logged non-superusers out. Every write in it needs a
superuser, not only the checkboxes the report mentioned, so the dialog is
read-only for everyone else. The logout itself was `main.tsx` treating 403 as a
dead session, against the contract deps.py spells out: only a 401 ends a
session, and a 403 now says so rather than silently signing someone out.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uq8mtNb97A7praJLyeEYgs
Three things moved the viewport independently — the shape-fit effect, focusNode,
and React Flow's own fitView prop — so a fourth for "centre the node I just
selected" would have been a fourth party to the argument. There is one effect
now, and which branch it takes is decided by what changed rather than by what is
true: selecting a node brings that node into the lane the panel leaves, and
every other change — new wiring, a new endpoint, a panel opening — re-fits the
whole flow into the same lane. A selection centres once, so the port edits that
follow re-fit around it, which is what makes a new edge's far end visible.
The refit triggers on the edge count, not the bindings key: that key changes on
every keystroke in a message-name field, and refitting per character is not what
"an edge was created" means.
renderedNodes overwrote xyflow's own `selected` flag, so a box-selection of
several nodes was invisible even though delete and copy acted on all of them.
The logs panel was a popover anchored on its own button, which is why it sat off
centre, hugged the button and closed on any outside click. It is a plain surface
above the dock now, and the button is stateful. Escape still closes it.
Expanding a node's editor gives the panel the whole inset and puts the code on
the left with the settings beside it, while the toolbar and the flow name
translate off screen. Narrowing the window past `md` gives the room back — the
sheet it becomes has no second column to hold.
The zoom buttons are gone: there is a mouse, or there is a pinch.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uq8mtNb97A7praJLyeEYgs
A bar drew its nested reading on top of the outer one in --chart-5, which
measures 2.53:1 against --primary and lost the 3:1 guideline for non-text. The
readings now partition the fill end to end, up to three of them, in a token of
their own: --primary-nested, the primary hue a few steps deeper, 3.14:1 light
and 3.12:1 dark. It cannot also clear 3:1 against --muted — in dark those two
are 5.82:1 apart and a colour 3:1 from both would need a 9:1 gap — so a segment
is drawn inside a gutter of outer fill rather than ever bordering the track,
which is what separates neighbours too, and what caps the count at three. A
nested value larger than its outer used to spill onto the track; it is clamped.
`inner` still reads as a single binding, so no dashboard needs migrating.
On a phone, .widget-grid took its width from the widest thing any widget held —
a truncating flex item still offers its whole unwrapped line as a min-content
contribution — and a handful of widgets had no floor of their own: the uPlot
legend is a table, a fieldset carries min-inline-size: min-content from the UA
sheet, and buttons are whitespace-nowrap. Each is capped now. A widget's body
scrolls rather than clipping, so long text stops painting over the title.
Gauges and bars move between readings instead of jumping, and a segmented
control slides one thumb rather than recolouring cells. The gauge arc is drawn
whole and revealed by its dash, because `d` cannot be transitioned.
UplotChart pushed new readings only when the point count changed, so once a
rolling window was full a refetch left the old values on screen.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uq8mtNb97A7praJLyeEYgs
`tests/utils/api.ts` took the API origin from `VITE_API_URL`, which
`tests/config.ts` loads out of `app/.env`. In a checkout configured for a
deployment that names the deployment — so the browser went to the local stack
while every setup and teardown call, `deleteAll` included, went to the live
one. `privateApi.ts` had the same reading, and it creates users.
Both origins now come from one place: `PLAYWRIGHT_BASE_URL`, with the API
derived from it (`app.<domain>` → `api.<domain>`) or named outright by
`PLAYWRIGHT_API_URL`, which is what CI and the compose service set. Nothing in
the suite reads `VITE_API_URL` any more.
Belt and braces, since a stack served under a real domain answers to the same
names its production instance does: a global setup resolves both origins and
refuses anything that is not loopback or a private range, before a test runs.
`PLAYWRIGHT_ALLOW_PUBLIC=1` says you meant it.
`make test-frontend` is now that safe run — the Playwright image on the proxy
network with both names mapped onto Traefik by address, as the host user so it
does not leave root-owned results behind.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NUb8YpL2s3gmN9WTACTt4q
A flow's inputs are the messages it takes from outside — a dashboard control,
a run, the API — and its outputs are what a batch run reports. Both existed in
the document and in the engine, and neither had any UI: the values looked
hard-coded on the canvas and the Run button always used the declared defaults.
The canvas now draws each as a labelled endpoint, the way it already draws a
dashboard tile or another flow, skipping an input something else already
accounts for. The flow panel edits them — mode, name, type, starting value,
and for a live flow the value it currently holds with a way to put a new one
in. Pressing Run on a batch flow asks for its parameters first.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NUb8YpL2s3gmN9WTACTt4q
A python node's settings are constants of its own function, so they are passed
the way its ports are: by name. The controller binds them to the compiled
function, the `params` field is gone from the worker and remote protocols, and
a setting sharing a port's name is reported as a node error rather than
shadowing it. The panel's scaffold follows suit and keeps the header in step
with both ports and settings.
The demo's `pace` moves from a flow input to a setting of the training node,
which is what it always was.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NUb8YpL2s3gmN9WTACTt4q
The socket belonged to whichever hook instance ran its effect first. Passive
effects run children before parents, so on Home that was the brain graph rather
than the shell: navigating to a sibling route unmounted the graph, which closed
the socket, while the shell kept the reference count above zero. From there the
page was deaf for the rest of its life, with nothing left to reconnect it.
A module-level connection with a real refcount replaces it — connect on the
first subscriber, disconnect on the last — and the hook is a thin subscription
with the same signature, correct under StrictMode's mount/unmount/mount.
A 1008 now reconnects instead of returning silently: the token is read afresh
per attempt, and three consecutive rejections fall through to the caller's auth
handler so a revoked session surfaces rather than spins.
The snapshot's emit counts are read into a store of their own, apart from the
live count, so a graph that connects into a busy engine is drawn as busy without
every neuron claiming it just fired. The neuron and edge pulses now key off a
change seen while they were mounted, so returning to Home no longer replays
every emission of the session.
Home gets a live indicator for the case none of this can fix: quiet while the
socket is up, and named in words when it is down, since HTTP polling keeps the
rest of the page looking current.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HTsT1isxUjw5gtkJk8WhuA
The four widget types added this round had renderers but no way to configure
them. The panel now offers a bar's nested reading, unit and range (no step —
that is a slider's), the forecast's item count on the agenda's field, a chart's
y axis title beside its y range, and the icon's mapping editor: a value, a
glyph and a colour per row, first match wins, with a fallback glyph below.
Adds tests/widgets.spec.ts, which asserts each of them on /view: the nested bar
inside its outer fill, the glyph following the message, five forecast columns
fading outwards, a clock that reads the wall without being flagged unbound,
a segmented control and a latching button reading back what they published,
and an unbound tile that says so instead of taking the page down. The axis
title is drawn into uPlot's canvas, so it is checked by panel round-trip.
mobile.spec.ts grows a bar and a forecast so the width check covers them.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HTsT1isxUjw5gtkJk8WhuA
A record or an artifact reference was serialised into the port row, and the
panel widened until the type selects and the buttons beside them were pushed
off its edge — a checkpoint reference is 130 characters of digest, and none of
them are what you want while wiring a flow. What shows now is what the value
*is*: 'artifact · weights.json · 60B', 'record · 3 fields'. A chevron unfolds
the whole of it, wrapped, inside the panel it belongs to.
A scalar still reads as itself, and scrolls its own overflow into view when it
is longer than the room it was given. That behaviour already existed inside
the edge inspector; it moves to Common/Marquee so the panel can have it too,
and the inspector drops its own copy of the raw-JSON block along with it.
The rows are smaller for it: the type select finally fits the word 'artifact',
and a port nothing has come through on says so with a dash rather than a
sentence — nine ports of 'nothing has come through yet' is a panel of prose
about the absence of values.
The e2e check asserts both halves: that the summary is what appears, and that
the panel is still exactly 400px with the value unfolded.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AD8SfVhzXBG2nAfFcVh3iD
Two things the first pass got wrong.
The Changes and "Given up on" lists had no cap, so they ran as long as the
audit trail did — and worse, a truncating flex row still offers its whole
unwrapped line as a min-content contribution, so the card sized itself to the
longest entry and took the page sideways with it. Both now use the same
capped, scrolling box the runs and failures lists already had, which fixes the
length and the width together.
Running downwards, a rank of eight nodes was two thousand pixels across
because a node box is landscape: siblings cost a rank four times as much
across as they do down it. A rank wider than two now wraps onto the ranks
below, settling over a few passes since wrapping one rank pushes what was
under it up into the room that freed. The value chip on an edge no longer
reserves its width there either — that width is spent across the screen rather
than along the flow, and the rank gap it would widen is already wider than the
chip is tall. The same flow that laid out 2040x216 is now 803x722; a chain and
a diamond are unchanged, and so is every desktop layout.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VDSXaRhvqHYNevgDGmNAto
The canvas lays itself out: a layered graph, left to right on a desktop and
top to bottom on a phone, with room reserved for the value each edge carries.
Nodes cannot be dragged and `NodeDef.position` is gone from the document —
a graph nobody can arrange is one worth keeping small, which is what keeps
flows atomic. Endpoints join the same layout, so their lanes and the
localStorage that remembered where they were dragged go too.
Mobile, per the new Responsive section of DESIGN-GUIDELINES.md: the dock caps
its width and wraps instead of running off the screen, the dashboard stacks
into one column rather than shrinking a wall panel to a fifth of its size, and
Home stops widening its grid track past the viewport. A Playwright project at
a phone's width fails the build when a screen no longer fits.
Along the way: publish is the checkmark that was already there rather than a
button that appears and disappears, with discard beside it on both the flow
and the dashboard; the brain reveals a neuron's name on the first tap; and the
port sparklines get room to breathe.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VDSXaRhvqHYNevgDGmNAto
A dashboard edit is a draft now, and the flow canvas draws the controls the
panels actually carry, so the fixture has to publish it the same way it
already publishes the flow. The assertion is unchanged.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XC2jX6Hdj7pxGGKzBTrbqB
One shell for both editors. Flows and dashboards each get a searchable
overview under the padded shell, their editors move to the full-bleed
canvas, and the floating chrome is shared: a title bar that only says
what you are looking at, and a bottom dock carrying everything else —
the flow bar's status, settings and Publish moved down there, the
add-flow button moved to the overview.
Dashboards gain the rest of M4's visualization work:
- widgets are picked by clicking them, with the header as the drag
handle so a slider still slides and a switch still flips while
editing; settings moved into the flows' SidePanel
- react-grid-layout for drag and edge-resize, so the stored x/y finally
mean something; a dashboard nobody arranged is shelf-packed once
- a per-dashboard grid size, so a panel can be matched to its screen
- the chart widget, drawn with uPlot: several messages on one axis, fed
from the stored history plus the live socket tail, coloured from the
new --chart-1..5 ramp
- /view/{name}: the URL a wall panel is pointed at — no sidebar, no
footer, no editing, and no editor code, since routes are split
- a widget wired to a payload type it cannot carry, or wired to nothing
at all, carries the same red dot a failing node does; the picker
records the type it bound and WidgetDef refuses a mismatch on save
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01H7LwYgJfpkbLCTeiAf8U4A
The specs run against a development stack, so every run left a test_flow_*
in someone's flow list. Each spec now tears down what it made in an afterAll,
which runs whether or not the tests passed, and the three copies of the API
helper move into tests/utils/api.ts.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01H7LwYgJfpkbLCTeiAf8U4A
Moving a dashboard slider lit up an edge between two nodes that had done
nothing. The canvas pulsed on the message's timestamp alone, and a message
has no idea who published it — so it credited whichever node happened to
be drawn as a producer.
That was never only about dashboards. Two nodes producing one message
pulsed both their edges whichever fired, and a message produced in another
flow changed with nothing on screen to account for it at all.
Values now carry their cause: a node, a dashboard widget, another flow, an
agent or an API caller. An edge pulses only for the producer that actually
published, and the edge inspector says where a value came from when it did
not come from a node.
What is not a node in this flow is now drawn as one — a label rather than
a card, because a dashboard with twenty tiles would otherwise bury the
logic the canvas exists to show. That covers cross-flow wiring too, which
is the link in/out affordance that has been missing.
They are never part of the document. They join at render, after everything
that reads or writes the canvas nodes, so an autosave, an undo or a delete
cannot reach them — with a Playwright test that drags a node and asserts
the stored flow still holds exactly what it did.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011LF61rxW1FG5YCD2J9YqjY
Flows can now be taken off the engine and put back. Stopped state lives in a
runtime.json beside the flow, not in the flow document: the canvas autosaves
that document, so a stopped flow would otherwise start itself again on the
next edit. A stopped flow gets no subscriptions, schedules or webhooks, its
nodes are skipped by the scheduler, and running it answers 409. Pausing holds
a flow's nodes while its values keep arriving, so the canvas still shows what
is coming in.
Node code is user code and print is how it says things, so stdout is teed
through a contextvar sink active only during a node execution — one event per
execution, capped, so a chatty node cannot outrun the stream. A node that
fails sends its traceback the same way, trimmed to the author's own frames.
The dock gains a logs panel and a pause control; the dashboard replaces its
placeholder with what is running, stopped or failing; the edge inspector can
send the last message again.
Single-stepping is deferred and noted: the scheduler keeps no progress between
calls, so a step button would re-run the same node rather than advance.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Edits autosave to flow.draft.json and nodes.draft/ instead of the files the
engine reads, so the pipeline keeps running the published version until
someone publishes. Every save carries the version it was based on: a second
client editing the same flow is refused with 409 and offered the choice
between their version and its own, rather than silently overwriting.
Draft saves no longer rebuild the pipeline; validation and node status for a
draft come from a throwaway build that never touches live state.
Also fixes a latent bug where an empty state backend is falsy, so Pipeline
quietly built itself a second, private state and left message history empty.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Deleting a node cost its source with no way back. Every mutation already
funnels through one commit, so undo/redo is a bounded stack of node
snapshots replayed through the same debounced save. Deleting a node only
drops it from flow.json — the source file survives — so restoring the id
restores the code. Renaming a message now offers to follow the rename
across every node still bound to the old name, as one undoable step.
Autosave never fired: flush depended on the whole mutation object, which
react-query rebuilds every render, so the effect re-ran and its cleanup
cancelled the pending timer. Unmounting now flushes rather than drops.
The canvas looked blurry zoomed out because Background scales the dot
radius by zoom, leaving quarter-pixel dots on a drifting tile; radius
and spacing now divide the zoom back out, spacing in octaves so the grid
halves. Edge value labels are opaque, the edge popover fits its summary
on one row with a trash icon and scrolls names that overflow, and flow
settings moved to the flowbar. The flowbar was sized against the
viewport rather than the canvas, so its buttons left the screen once
enough flows were open.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KkmeRiyeYmVZqJVwuyHq9o
pytest was deleting every user on teardown against the development
database. The engine is built at import time, so tests/__init__.py pins
POSTGRES_DB before app.core.config loads; the fixture creates the schema
and drops the database again, guarded against a name that is not _test.
Playwright now defaults at the integrated stack, which is the origin the
API allows, so a bare `bunx playwright test` works without a dev server.
The four template specs that asserted copy we no longer ship are gone,
along with the helpers they were the last callers of. The admin edit
assertion was page-wide and only ever passed on a fresh database.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KkmeRiyeYmVZqJVwuyHq9o
- MQTT nodes failed to build: the topic map was renamed to talk in ports, but
__slots__ still declared the old name, so every MQTT node raised
AttributeError. Building one of each node type is now a test, since __slots__
makes this failure invisible until someone places the node.
- Port names offer the messages already in play: everything published is worth
reading, and an input nobody provides yet is worth publishing. A message only
connects when both ends spell it the same way, so choosing beats typing.
- Adding a port focuses its name field.
- Dragging onto an input that already reads something offers the extra port as
well as the replacement — an MQTT or InfluxDB node usually wants both.
- The template's Item model, its routes, screens and table are gone.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016WzrvW7rjQbynnhF6pxh6i
The browser half of M3. Flows open on a full-bleed canvas with their chrome
floating over it: flow tabs top, dock bottom, node settings in a panel on the
right that leaves the graph visible and running behind it.
- Connections are derived, not stored. A node declares the messages it reads
and publishes; every matching pair draws an edge, so two producers of one
message converge on their consumer. Dragging output to input is shorthand
for pointing that input at the producer's message, and asks before it
replaces an existing one.
- Values land on the edges as they flow, over a websocket that feeds a store
outside React, so a value arriving re-renders its own chip and nothing else.
Clicking an edge shows the last payload and when it arrived.
- Node source is edited in Monaco, loaded only when a panel opens and themed
from the design tokens.
- Edits autosave; identical documents are skipped server-side, so a quiet
canvas writes nothing.
- Validation from the API shows on the node it belongs to and is summarised in
the dock, where each entry pans to its node.
- Works on a phone: touch-connect, 44px dock targets, and the node panel
becomes a full-screen sheet.
Two new tokens (--status-success, --font-mono) are mirrored in the website repo
and recorded in DESIGN-GUIDELINES.md.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016WzrvW7rjQbynnhF6pxh6i
The submodule collapse was only half applied: .gitmodules was deleted but
backend/ and frontend/ were still recorded as gitlinks, so none of their
files were tracked. Replace the gitlinks with the real trees.
Also untrack .env (it carried placeholder secrets) in favour of a tracked
.env.example, drop the committed __pycache__, and narrow the blanket *.png
ignore that would have swallowed design assets.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
stroblmeandClaude Opus 5