Two things the first pass got wrong.
The Changes and "Given up on" lists had no cap, so they ran as long as the
audit trail did — and worse, a truncating flex row still offers its whole
unwrapped line as a min-content contribution, so the card sized itself to the
longest entry and took the page sideways with it. Both now use the same
capped, scrolling box the runs and failures lists already had, which fixes the
length and the width together.
Running downwards, a rank of eight nodes was two thousand pixels across
because a node box is landscape: siblings cost a rank four times as much
across as they do down it. A rank wider than two now wraps onto the ranks
below, settling over a few passes since wrapping one rank pushes what was
under it up into the room that freed. The value chip on an edge no longer
reserves its width there either — that width is spent across the screen rather
than along the flow, and the rank gap it would widen is already wider than the
chip is tall. The same flow that laid out 2040x216 is now 803x722; a chain and
a diamond are unchanged, and so is every desktop layout.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VDSXaRhvqHYNevgDGmNAto
The canvas lays itself out: a layered graph, left to right on a desktop and
top to bottom on a phone, with room reserved for the value each edge carries.
Nodes cannot be dragged and `NodeDef.position` is gone from the document —
a graph nobody can arrange is one worth keeping small, which is what keeps
flows atomic. Endpoints join the same layout, so their lanes and the
localStorage that remembered where they were dragged go too.
Mobile, per the new Responsive section of DESIGN-GUIDELINES.md: the dock caps
its width and wraps instead of running off the screen, the dashboard stacks
into one column rather than shrinking a wall panel to a fifth of its size, and
Home stops widening its grid track past the viewport. A Playwright project at
a phone's width fails the build when a screen no longer fits.
Along the way: publish is the checkmark that was already there rather than a
button that appears and disappears, with discard beside it on both the flow
and the dashboard; the brain reveals a neuron's name on the first tap; and the
port sparklines get room to breathe.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VDSXaRhvqHYNevgDGmNAto
A dashboard edit is a draft now, and the flow canvas draws the controls the
panels actually carry, so the fixture has to publish it the same way it
already publishes the flow. The assertion is unchanged.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XC2jX6Hdj7pxGGKzBTrbqB
One shell for both editors. Flows and dashboards each get a searchable
overview under the padded shell, their editors move to the full-bleed
canvas, and the floating chrome is shared: a title bar that only says
what you are looking at, and a bottom dock carrying everything else —
the flow bar's status, settings and Publish moved down there, the
add-flow button moved to the overview.
Dashboards gain the rest of M4's visualization work:
- widgets are picked by clicking them, with the header as the drag
handle so a slider still slides and a switch still flips while
editing; settings moved into the flows' SidePanel
- react-grid-layout for drag and edge-resize, so the stored x/y finally
mean something; a dashboard nobody arranged is shelf-packed once
- a per-dashboard grid size, so a panel can be matched to its screen
- the chart widget, drawn with uPlot: several messages on one axis, fed
from the stored history plus the live socket tail, coloured from the
new --chart-1..5 ramp
- /view/{name}: the URL a wall panel is pointed at — no sidebar, no
footer, no editing, and no editor code, since routes are split
- a widget wired to a payload type it cannot carry, or wired to nothing
at all, carries the same red dot a failing node does; the picker
records the type it bound and WidgetDef refuses a mismatch on save
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01H7LwYgJfpkbLCTeiAf8U4A
The specs run against a development stack, so every run left a test_flow_*
in someone's flow list. Each spec now tears down what it made in an afterAll,
which runs whether or not the tests passed, and the three copies of the API
helper move into tests/utils/api.ts.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01H7LwYgJfpkbLCTeiAf8U4A
Moving a dashboard slider lit up an edge between two nodes that had done
nothing. The canvas pulsed on the message's timestamp alone, and a message
has no idea who published it — so it credited whichever node happened to
be drawn as a producer.
That was never only about dashboards. Two nodes producing one message
pulsed both their edges whichever fired, and a message produced in another
flow changed with nothing on screen to account for it at all.
Values now carry their cause: a node, a dashboard widget, another flow, an
agent or an API caller. An edge pulses only for the producer that actually
published, and the edge inspector says where a value came from when it did
not come from a node.
What is not a node in this flow is now drawn as one — a label rather than
a card, because a dashboard with twenty tiles would otherwise bury the
logic the canvas exists to show. That covers cross-flow wiring too, which
is the link in/out affordance that has been missing.
They are never part of the document. They join at render, after everything
that reads or writes the canvas nodes, so an autosave, an undo or a delete
cannot reach them — with a Playwright test that drags a node and asserts
the stored flow still holds exactly what it did.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011LF61rxW1FG5YCD2J9YqjY
Flows can now be taken off the engine and put back. Stopped state lives in a
runtime.json beside the flow, not in the flow document: the canvas autosaves
that document, so a stopped flow would otherwise start itself again on the
next edit. A stopped flow gets no subscriptions, schedules or webhooks, its
nodes are skipped by the scheduler, and running it answers 409. Pausing holds
a flow's nodes while its values keep arriving, so the canvas still shows what
is coming in.
Node code is user code and print is how it says things, so stdout is teed
through a contextvar sink active only during a node execution — one event per
execution, capped, so a chatty node cannot outrun the stream. A node that
fails sends its traceback the same way, trimmed to the author's own frames.
The dock gains a logs panel and a pause control; the dashboard replaces its
placeholder with what is running, stopped or failing; the edge inspector can
send the last message again.
Single-stepping is deferred and noted: the scheduler keeps no progress between
calls, so a step button would re-run the same node rather than advance.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Edits autosave to flow.draft.json and nodes.draft/ instead of the files the
engine reads, so the pipeline keeps running the published version until
someone publishes. Every save carries the version it was based on: a second
client editing the same flow is refused with 409 and offered the choice
between their version and its own, rather than silently overwriting.
Draft saves no longer rebuild the pipeline; validation and node status for a
draft come from a throwaway build that never touches live state.
Also fixes a latent bug where an empty state backend is falsy, so Pipeline
quietly built itself a second, private state and left message history empty.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Deleting a node cost its source with no way back. Every mutation already
funnels through one commit, so undo/redo is a bounded stack of node
snapshots replayed through the same debounced save. Deleting a node only
drops it from flow.json — the source file survives — so restoring the id
restores the code. Renaming a message now offers to follow the rename
across every node still bound to the old name, as one undoable step.
Autosave never fired: flush depended on the whole mutation object, which
react-query rebuilds every render, so the effect re-ran and its cleanup
cancelled the pending timer. Unmounting now flushes rather than drops.
The canvas looked blurry zoomed out because Background scales the dot
radius by zoom, leaving quarter-pixel dots on a drifting tile; radius
and spacing now divide the zoom back out, spacing in octaves so the grid
halves. Edge value labels are opaque, the edge popover fits its summary
on one row with a trash icon and scrolls names that overflow, and flow
settings moved to the flowbar. The flowbar was sized against the
viewport rather than the canvas, so its buttons left the screen once
enough flows were open.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KkmeRiyeYmVZqJVwuyHq9o
pytest was deleting every user on teardown against the development
database. The engine is built at import time, so tests/__init__.py pins
POSTGRES_DB before app.core.config loads; the fixture creates the schema
and drops the database again, guarded against a name that is not _test.
Playwright now defaults at the integrated stack, which is the origin the
API allows, so a bare `bunx playwright test` works without a dev server.
The four template specs that asserted copy we no longer ship are gone,
along with the helpers they were the last callers of. The admin edit
assertion was page-wide and only ever passed on a fresh database.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KkmeRiyeYmVZqJVwuyHq9o
- MQTT nodes failed to build: the topic map was renamed to talk in ports, but
__slots__ still declared the old name, so every MQTT node raised
AttributeError. Building one of each node type is now a test, since __slots__
makes this failure invisible until someone places the node.
- Port names offer the messages already in play: everything published is worth
reading, and an input nobody provides yet is worth publishing. A message only
connects when both ends spell it the same way, so choosing beats typing.
- Adding a port focuses its name field.
- Dragging onto an input that already reads something offers the extra port as
well as the replacement — an MQTT or InfluxDB node usually wants both.
- The template's Item model, its routes, screens and table are gone.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016WzrvW7rjQbynnhF6pxh6i
The browser half of M3. Flows open on a full-bleed canvas with their chrome
floating over it: flow tabs top, dock bottom, node settings in a panel on the
right that leaves the graph visible and running behind it.
- Connections are derived, not stored. A node declares the messages it reads
and publishes; every matching pair draws an edge, so two producers of one
message converge on their consumer. Dragging output to input is shorthand
for pointing that input at the producer's message, and asks before it
replaces an existing one.
- Values land on the edges as they flow, over a websocket that feeds a store
outside React, so a value arriving re-renders its own chip and nothing else.
Clicking an edge shows the last payload and when it arrived.
- Node source is edited in Monaco, loaded only when a panel opens and themed
from the design tokens.
- Edits autosave; identical documents are skipped server-side, so a quiet
canvas writes nothing.
- Validation from the API shows on the node it belongs to and is summarised in
the dock, where each entry pans to its node.
- Works on a phone: touch-connect, 44px dock targets, and the node panel
becomes a full-screen sheet.
Two new tokens (--status-success, --font-mono) are mirrored in the website repo
and recorded in DESIGN-GUIDELINES.md.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016WzrvW7rjQbynnhF6pxh6i
The submodule collapse was only half applied: .gitmodules was deleted but
backend/ and frontend/ were still recorded as gitlinks, so none of their
files were tracked. Replace the gitlinks with the real trees.
Also untrack .env (it carried placeholder secrets) in favour of a tracked
.env.example, drop the committed __pycache__, and narrow the blanket *.png
ignore that would have swallowed design assets.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
stroblmeandClaude Opus 5