A `webpush` alert channel, and the PWA it needs to arrive. The payload is
encrypted to the subscription (RFC 8291) and the request signed with this
installation's own keypair (RFC 8292), both over `http-ece` — `pywebpush`
does the same in one call but brings `requests` and `aiohttp` with it, two
HTTP stacks beside httpx on a machine that may be a Raspberry Pi.
The manifest and the worker are hand-written rather than `vite-plugin-pwa`:
there is nothing worth precaching when the page carrying the credential is
`no-store`, so the worker handles `push` and `notificationclick` and nothing
else. `registration.scope` is the app's root in both places it runs, which is
why the payload carries no URL.
A run finishing in error is the first event worth waking someone for; `ok`
and `cancelled` describe to nothing, so a nightly batch that works stays
quiet. The events were already on the bus — only the filter changed.
`WEBPUSH_FILE` is a derived path, so the keypair lands on the data volume
with the alerts beside it. Off it, a rebuild would silently stop every phone
being notified: the key they subscribed against would be gone.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014EbeFPm6WNC3YD9vrqqT3a
The two sides both touched `submit_ready`'s readiness check, for unrelated
reasons, so the conflict is textual rather than semantic and both changes
stand:
- `831a537` completes a node that is not ready instead of passing over it,
so a producer that can never run stops stranding its consumers.
- the audit branch has `_is_node_ready` return the values it read, so the
node runs on them instead of asking state for the same keys again.
Merged as: read once, keep the values whether or not the answer is yes, and
take the not-ready branch from `831a537`. Its reasoning holds under the
merge — by the time readiness is consulted, `in_degree` is zero and every
in-wave producer has finished, so the answer cannot change later in the
wave.
Also fixes a fixture this branch added: the module-scoped row cleanup in
`tests/conftest.py` assumed a schema, and `tests/flow` overrides `db` with a
no-op because those tests need no database. It only showed when that
directory ran on its own.
746 tests green, and each directory green alone. Engine throughput is
unchanged by the merge (559 msg/s on the memory backend, against 639 before
it and 262 at the start of the audit).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01M6hPWS6YEbT1P8LxhhFb2T
A three-node cascade publishes 13-16 events and each one crossed to the
event loop on its own. They are one `call_soon_threadsafe` now — whatever
was published between two turns of the loop goes over together — and every
subscriber still receives every event, oldest still dropped first when one
falls behind.
The socket end of the same path:
- **any frame from the client ended its stream.** `receive_text` was
awaited once, outside the loop, so a keepalive — or anything else a
client decided to say — satisfied it and was read as the client going
away. It is recreated per iteration; only a disconnect ends the stream.
- events go out in one frame per wave (`{"type": "batch", "events": [...]}`,
capped at 64), serialised once with orjson rather than per client with
the stdlib's `json.dumps` through `send_json`. The client unpacks a batch
and still understands single frames, so an older engine behind a newer
bundle keeps working.
- authenticating and building the snapshot happen on a thread. Both were on
the event loop: one is a database round trip, the other reads the whole
of state, per connect and again per `dashboard_changed` per panel.
`Pipeline.values()` — what that snapshot is — no longer SCANs the whole
Redis namespace. It scanned five bookkeeping keys for every message to find
the messages; `RedisState` keeps a set of the names beside them and answers
from it. Maintained wherever a message is written, so a seeded value or a
deleted flow keeps it exact.
On the client, while in the same file:
- a `node_health` event invalidates the flow's detail. The canvas draws
health from the server-derived `issues`, so a node going down or
recovering only showed on mount, navigation or a rebuild. The store had
a health map of its own that nothing ever read; it and `useNodeHealth`
are gone rather than wired up, since the server's view is the one the
canvas already uses.
- a reconnect invalidates the five key families this socket feeds instead
of the entire cache, and the backoff is jittered. The usual reason a
socket dropped is the engine restarting, so every tab and every wall
panel refetched everything, together, at the moment it was least able to
answer.
- a frame that will not parse costs the frame, not the connection. It was
the one unguarded `JSON.parse` in the app; an exception there escaped to
`window.onerror` and left whatever it had already applied behind.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01M6hPWS6YEbT1P8LxhhFb2T
Measured with `make bench-engine` against a real Redis: 103.6 -> 164.4
messages a second on a five-node chain (p50 latency 2125 -> 1171 ms) and
34.8 -> 63.2 on a fan-out of twenty. Against the memory backend, which is
what a pip install runs on, 262 -> 626.
The two that bought most of it:
- `StateBackend.record` puts a published value, its timestamp, its series
and its version counter in one round trip. They were four calls building
four pipelines, and a value crossing an edge pays them twice. A released
rate-limit hold rides along instead of a DEL per port.
- the readiness check reads a node's inputs and hands them to the node,
rather than reading the triggering ones to count them and having the node
read the same keys again a moment later.
`apply_outputs` was a second copy of `_record_outputs` and is now the same
code plus the event that distinguishes it.
The rest, each small:
- `_derive` builds a node-by-id map and a `consumes` index, so dispatching
an item and publishing a value stop scanning every node in the
installation.
- `read_all` is memoised against the store revision — it sits on the
publish path, so a dashboard slider was reading and validating every
flow file per value. Same mechanism `_wiring` already uses.
- the `message_value` source block is built once per node instead of per
emission.
- both timer threads ask the queue to promote only when something is
actually due, which takes an idle engine from ~4 Redis round trips a
second to one.
- the shared httpx client is bounded (32 connections, one retry); its
default pool is 100 with no per-host cap, so one slow endpoint could
take it and every other sender node with it.
- the MQTT and delay nodes no longer log a line per message at INFO.
Robustness, in the same pass:
- `MemoryWorkQueue._done` was a set nothing ever removed from — one entry
per non-idempotent node per item, for the life of the process, in the
default configuration. Capped, the way the Redis side expires its
markers.
- a saturated engine can claim from the due lane past the cascade limit.
The capacity gate sits in front of the claim, so the due lane's priority
— decided inside it — did not apply while every slot was held: a motor's
stop was not behind the long nodes, it was unread. Only after a slot has
genuinely failed to free for half a second, and briefly, so the backlog
is not starved in turn.
- `reclaim_stale` dispatches through that same gate. It could return sixty
entries and push in-flight far past the limit the gate exists to hold.
- a flow's nodes are stopped together rather than one after another. Each
gets `NODE_STOP_TIMEOUT`, so a flow whose broker was unreachable took
five seconds per node — long enough to outlast `REBUILD_WAIT` and 503
the deploy.
- the worker pool and the HTTP client are closed on a thread, not on the
event loop, and a run closes the state backend it built (on Redis, a
client and a connection pool per run).
- the five background tasks say something when they die. Each catches
exceptions inside its loop, so one raised anywhere else left the engine
serving with no metrics, no alerts or no artifact sweep, silently.
`tests/flow/test_round_trips.py` counts the state operations one message
costs — four, where it was about eleven — because none of the above would
fail a behavioural test if it were undone.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01M6hPWS6YEbT1P8LxhhFb2T
GPU count is not detected, so FLOW_GPUS was 0 on a fresh install and a node
asking for one was silently clamped to zero and ran concurrently with every
other. Setting the variable serialised them, but it was an environment
variable only — `serve` had --max-runs and --max-workers and no --gpus.
The clamp warning now names the flag when nothing here declares a card.
The same flags are written into the environment before the settings are
built, so a value they refused died in a pydantic import naming no flag.
They are checked where they are typed instead.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019Hra4ndWMCLU5F3KjUuVAc
A worker that has run a jax node keeps holding the GPU after the run: XLA
preallocates most of the VRAM at import and never releases it, so the next
process OOMs on preallocation while a warm idle worker sits on the card.
Pools are kept warm on purpose — a library reads its environment at import,
so a warm worker cannot be re-told — but the end of a run is a point where
the memory should go back, and the environments carrying a GPU assignment
are exactly the pools that ran on one. Idle ones go now, busy ones when
they return.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019Hra4ndWMCLU5F3KjUuVAc
Inside a worker `import fluksio` is the reporter, which had emit and the
artifact calls but no logger — so `fluksio.logger.info(...)`, written
against the SDK's top-level export, died with AttributeError after the
training it was reporting on had already succeeded. Its records go to the
same capture a print does; the handler resolves sys.stderr per record
because a call runs under redirect_stderr.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019Hra4ndWMCLU5F3KjUuVAc
Both boilers on the house had been unable to switch on since the Node-RED
transition, and the reason was here rather than in their logic: the command
reached `boiler.water_boiler` and stopped, because `dmx.switches` never ran.
A wave orders nodes by a dependency count, and two things decremented that
count only on success:
- a node that published nothing — rate limited, unchanged, or failed — never
freed its consumers. `dmx.switches` reads both boilers through `rbe` nodes,
so the kitchen one being unchanged, which it is nearly always, held the main
one's command back. The encoder ran about four times an hour, and only when
the lights happened to change in the same wave.
- a node that could not run at all never freed them either, permanently.
`plugs.pump_run` waits on a watering pulse that only exists at 02:00, so
every wave it appeared in took its consumers out with it.
Freeing a consumer is not the same as running it: `untouched` already refuses
to run anything whose inputs nothing refreshed, and that is the accurate test.
The dependency count is ordering, not permission.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01C5H4uLCCpsbipL1R7WKCee
The poll loop remembered what it read rather than what it published, so a
value the node could not publish counted as said: the next poll skipped it,
succeeded, and health went back to ok with the port still dark. Remember it
only after inject returns, and report ok last.
A node reporting itself down is now derived into its flow's issues on read
and counted on the health summary, so the canvas marks it and Home says so.
Being down does not stop the flow, and the issue clears by itself when the
node reports well again. The repeating poll warning is logged once per
outage rather than once per tick.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01K1moruzue2kTJd3uVisgNk
ConnectorNode.stop cancelled its poll task and then caught CancelledError
around the await — the fourth site of the trap 93e4527 closed elsewhere,
swallowing a cancellation aimed at whoever asked for the teardown. It now
calls the shared Node._cancel_task, which keeps retrieving whatever the
loop raised on its way out, as the old `except (CancelledError, Exception)`
did.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01K1moruzue2kTJd3uVisgNk
The Influx client was built with no timeout, so every query and write fell
through to influxdb-client's own 10 s default — invisible to a flow and
unchangeable. The param is in seconds like its peers; the client counts in
milliseconds, so the call sites convert.
The publisher backlog was a module constant, read once at import. It is the
depth at which the oldest payload is dropped and the node goes degraded, and
a node that bursts wants more than one that trickles, so it moves to Params
and is read where the queue is built.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01K1moruzue2kTJd3uVisgNk
Without one, aiomqtt's disconnect acknowledgement has no deadline, so a
subscriber cancelled while its socket is dead never finishes unwinding and
teardown abandons the task. The knob is per node because brokers differ.
Node stop paths cancelled their background task and then caught
CancelledError around the await, which swallows a cancellation aimed at
the caller — the trap Supervisor._cancel already documents. One shared
Node._cancel_task now waits the way the supervisor does; mqtt's publisher
and subscription and delay's cron call it.
The api container also collected zombie python workers: orphaned when
--reload replaces the process holding their handle, they reparent onto a
PID 1 that reaps nothing but its own. `init: true` on the backend service.
A house's inverter broker dropped at 04:27 and the power flow was quarantined
20 seconds later. Quarantine was terminal — the supervised task returned and
only a publish or an engine restart could bring it back — so five hours of
power and battery readings are missing, and what ended it was an unrelated
`git pull` restarting uvicorn.
Two changes, both in that path:
- the failure budget is per task, not per flow. `power` runs an MQTT subscriber
and a Victron keepalive publisher against the same broker; they died together
and spent one shared budget in 41s, giving up before the 60s backoff step was
ever reached.
- quarantine is now a rest. The task sits out 5min, then 15, then an hour, and
each time gets its budget back and tries again, so a broker that comes back
is picked up without anyone watching. `quarantined` reads from whichever
tasks are currently resting.
The alert for it says when it will try again.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01C5H4uLCCpsbipL1R7WKCee
A bool was excluded from the history as "not a measurement", so a true/false
port had no curve in the node panel and none on an edge — only the word. It is
recorded as 0/1 now and drawn as steps, since a bezier through two states
slopes through readings that never happened. The axis is pinned to 0..1, so a
flag that was never on sits at the floor rather than mid-box.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Concurrent runs sat at 4 whatever FLOW_MAX_CASCADES said: that setting bounds
cascades, and the run drivers read a hardcoded MAX_PARALLEL nobody could reach.
FLOW_MAX_RUNS is the knob they read now, --max-runs/--max-cascades/--max-workers
are the same three as flags on serve, and the engine says which numbers it
started with — which is the only way to tell that a settings file was read.
Events keep the run they happened in. The payload always carried it and the
persist path dropped it, so reading one run's failures meant filtering the
engine-wide list; a batch run's id reaches those events now too, since a run
has no journaled item to name itself by.
Also: a provisioner's 0 means "no deadline" rather than "cancel on the next
reconcile", and a command that reaches no engine says how to start one.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015sbYeYaVgYQqm1sbx7wPdL
The timer thread promoted due work on a fixed one-second tick, so every
delayed item was 0-1000ms late whatever the load — measured on the house
at 705ms mean on a rollershutter stop, which is 2-4% of a 26-second
travel and accumulates in the position the motor node believes it is at.
It now sleeps to the soonest deadline and is woken when a nearer one is
scheduled, which measures 0.9ms end to end through Redis.
A promoted timer also went to the back of the queue. It goes into a due
lane of its own that `claim` reads first, so work that has waited out a
deadline is not held up by work that is merely queued.
Beside it, in the same code: seeding a message now bumps its version, so
a re-put flow's synchronous nodes no longer wait forever on a value that
is sitting in state; the consumer group drops the consumers of engines
that are gone (138 had accumulated on this installation); and the cast
that closes the long-standing `xclaim` mypy error.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Slurm is not a machine that attaches and stays; it is a queue somebody else
owns. So nothing here submits a node to it. It submits a job whose payload is an
ordinary worker dialling back in, and everything downstream — the protocol, the
artifacts, cancellation, the books — already worked and did not have to learn
what Slurm is.
The alternative, which Covalent takes, is to stage a serialized call and a
runner onto the login node, poll squeue and copy the result back: a second way
of running a node beside the one that exists. The cost of not doing that is one
assumption, that a compute node can open a connection outward. Where that is
false, _payload is the single method a staged variant would replace.
Clusters are configured in provisioners.json beside the alerts, since this is
infrastructure an operator writes rather than anything a flow says. The script
is generated with the system ssh and no new dependency, and prerun owns the
environment — deliberately no pip install, because what is on a cluster is
somebody's decision.
One outstanding request per profile, cancelled if it never attaches and on the
way out. Nothing autoscales.
The run gate needed the same hook: a run held before it starts never reaches the
placer's own wait, so it would have queued forever on a machine nothing had
asked for.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A6HeySA27EkGANZN95QySW
Raw cpus and gpus are a property of the machines an installation has, so a node
written against a cluster quietly stops meaning anything when the cluster is
replaced. A node says "gpu-small" instead, and what that is stored here —
editable, and read again every time the node is built, so changing the flavor
changes what the next run gets.
Memory joins the schema properly (`ram`, in MB, accepting "2G"), along with
`duration_s` for how long a node is expected to take. That one is recorded and
shown and nothing else yet: a statement for whoever is planning around the node,
not a limit — the limit is still `timeout`.
A flavor and a number for the same thing is refused, compared by value so an
editor writing the whole object back with its defaults still round-trips. A name
nothing stores is refused at the save, which covers the canvas and `fluksio
sync` at once, and deleting one a node still asks for says which node.
Four sizes are seeded on an installation that has none, and never re-seeded:
re-adding one somebody deliberately removed is an argument nobody wins.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A6HeySA27EkGANZN95QySW
The engine answered "where does this node run" twice, in two ways that could
not see each other: a device sent it to a worker carrying that label, and
resources were counted against the engine's own cores. Declaring both meant the
second answer won and nothing was counted at all — which the data-science
getting-started page and the worked example both do.
One question now, in flow/placement.py: of every machine attached, which could
grant what this node asked for, and which of those has it free. The books move
onto each machine — one accountant per worker, built from the inventory it
reported — and the waiting moves above them, where one condition variable can
be woken by a release anywhere or by a worker attaching. Locks go one way:
placer, then a machine's books, never back.
So a node asking for a card now finds the box that has one, rather than being
clamped down to none and run here. When nothing can grant the ask at all it is
still cut down and run — a flow written on a cluster has to work on a laptop —
but the ceiling is one real machine now, since taking the largest of each
dimension separately can describe a machine nobody has.
Two things fixed on the way. A device on a connector node held every batch run
of its flow forever, waiting for a worker that could never run an entry point.
And `prefer` falling back to the engine skipped the books, so the fallback held
nothing.
The bench flow's node has taken a `params` argument that with_settings has not
forwarded for some time, so the benchmark could not run at all: 62 ms median
submit-to-result with this, against the 61 ms on record.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A6HeySA27EkGANZN95QySW
A worker reported its labels and nothing about the machine behind them, so the
engine could route a node to a GPU box but not tell whether that box had a GPU
free. Inventory — cores, GPUs, memory — now arrives with the hello frame, and
the run frame carries back what the engine allocated for that call.
Which is protocol 2 on both ends. GPUs are never probed: asking a vendor tool
would make the one dependency two, so a GPU is what the batch job says it was
given or what --gpus says. A worker that reports nothing still attaches and is
scheduled by its label alone.
Two things a job scheduler needs: --max-idle stops a worker started for one job
rather than letting it hold its allocation to the walltime, and a refusal is now
fatal instead of a reconnect loop that reads as a hang in a job's log.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A6HeySA27EkGANZN95QySW
A port may now declare `image`, `audio` or `video`. Each is the artifact
reference the engine already had, narrowed by the `media_type` on it, so a
speech recogniser declares what it eats rather than taking any bytes at all and
finding out. Bytes still never travel as a message and nothing on the wire
stops being JSON: a camera publishes one reference per frame, a microphone one
per chunk, and a reference may carry a `meta` dict nothing here interprets.
Streaming media is therefore an ordinary streaming port — with one change to
what that means. An emission used to journal an item with no payload, so
downstream read whatever was current when the item was claimed; a consumer
slower than its producer saw only the newest chunk and the ones between were
lost. That is right for a training curve and wrong for a second of speech, so
an emission now journals a `kind="emission"` item carrying its values, and the
executor hands them to the nodes reading that message instead of writing them
to state again. The value in state stays the latest, which is what everything
else reads, and the wave is filtered by what actually changed rather than
walking everything reachable. No queue serialization change — the existing
`outputs` field carries it.
Continuous media makes the store's missing GC a real problem, so this closes
it: `sweep_artifacts` runs hourly, keeps every digest a `run_artifact` row
records or a live message holds, spares anything written in the last hour, and
stands aside entirely while a run is in flight, since a node may store a
checkpoint long before it returns the reference to it. That also collects the
orphans a deleted flow has always left behind. `ARTIFACT_GC_INTERVAL_S=0` turns
it off.
Around the edges: `GET /artifacts/{digest}` serves the media type the caller
passes and answers ranged requests, so a browser plays a clip rather than
downloading it; `PUT` spools to disk instead of holding the whole body in
memory, as does `save_artifact` given a path; a Media widget draws whatever its
message points at, and a wall panel may fetch the bytes its own tiles are
showing and nothing else; and a connector gets `save_artifact`, for a device
whose readings are bytes.
What this cannot do is live video: a frame every second or two is a glance, and
the honest answer above that is the camera's own stream, which the widget takes
as a URL and the browser plays from source.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The pieces were tested one at a time, so removing the one line in
`_build_node` that wraps a worker-backed function with its sink broke nothing
visible — while losing every generator node's last yield and returning None
in its place.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The store answers the new-node template when nothing was ever written for a
node, so such a node ran — returning {} on every call, reporting active and
ok, and saying nothing anywhere. Unreachable through `fluksio sync`, which
writes every body before it publishes; the editor end was open.
A run of a flow holding one is now refused, and the flow carries a
missing_source issue so it is visible before anybody runs it. A draft is
exempt: a node being written legitimately has no published body yet.
The generated client is regenerated for the new issue code, which also
catches up the drift left by earlier backend work (resources, code_digest,
idempotency_key).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A cache key held qualified input names, so the same node reading the same
values through two flows keyed differently and only a node with no inputs
could ever hit across one. The fingerprint beside the key already says what
the node is, and it has been flow-agnostic since it moved ahead of
assign_flow — the names were the last thing tying an entry to one flow.
Inputs now reduce by the node's own name for them; a name belonging to
another flow keeps its prefix, since reading it is part of what the
execution is. Every stored entry misses once and is re-run.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The worker held each yield one behind, because the last one is the node's
result when the generator returns nothing of its own. Only the engine knows
what ports a node declared, so the check happened when the *next* yield
arrived — a pass late, which for a training loop is however long one epoch
takes.
The worker now sends every yield as it happens and returns whatever its
generator returned; EmitSink holds the last one back and decides at the end
of the call what it was. Old "emit" frames are still handled, so a remote
agent that has not been restarted keeps working.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Five concurrent training nodes, each sizing its thread pool to every core,
left the engine's own event loop unscheduled: the API stopped answering
within 10 s and every client died. The same shape on a GPU deadlocked a run
for 21 minutes at 0% utilisation with nothing failing and nothing to read --
it just sat in `running`.
@node(resources={"cpus": 2}) is the declaration. The engine holds that much
for the length of the execution, so more of them than the machine has room
for wait their turn rather than oversubscribing it, and a `gpus` node holds
its card exclusively. FLOW_CPUS defaults to every core but two, and those two
are what keeps the engine answering.
Because a thread cap is read when the process imports the library, a warm
worker cannot be told a different one -- so an environment gets a pool of its
own and nodes deriving the same one share it, rather than paying a cold start
per call on exactly the nodes whose imports are slowest. XLA_FLAGS is never
derived: it is a composed, version-dependent string, so it travels in
resources.env where it is visible.
A node that declares nothing is not accounted for and behaves as it always
did -- it just gets FLOW_CPUS/FLOW_MAX_WORKERS as a thread cap, which is the
half of this that fixes the reported incident without anybody declaring
anything. An operator who set OMP_NUM_THREADS themselves still wins.
Resources are claimed strictly before a worker slot, so the two blocking
waits cannot deadlock. A node queued for them publishes node_queued and shows
on GET /workers/resources, because waiting and hanging looked identical.
Accounted, not enforced: no cgroups, no rlimits. Scheduling across machines,
flavours and enforcement are the next steps.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Three faults with one root: the stored body of a code-defined node is an
import shim, and nothing that mattered was ever read from the code itself.
- The run stamp could not identify what ran. The shim imports whatever is on
disk when the worker starts, and an uncommitted tree stamps <commit>-dirty
for every run it ever produces. Run.code_digest hashes the repository's .py
files, memoized on their stat state, and it is read again when the run is
actually claimed -- so a sweep queued for hours records the code each of its
runs executed, not the code that was there when it was submitted.
- The stage cache adopted code that was too new. The fingerprint hashed the
shim, which is invariant under any edit to the imported function or anything
it calls into, so a re-run was served from cache and answered without the
outputs the edit added. It now carries the repo digest and the node's
declared ports. Every fingerprint changes once, which invalidates the
existing cache; a canvas flow has no repository and keys as before.
- An interrupted sync looked like a hand-edited canvas. The engine answers a
new-node template for a node with no stored body, and the template carries
no marker, so the drift check read "somebody edited this" and demanded
--force -- for the one state that re-running the sync is the fix for.
NodeSource.missing states the fact, and sync skips those and reuses the
bodies it read instead of asking for each one twice.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The engine was I/O-bound on its own state backend. `RedisState.lock()` is one
key — `pipeline:_lock` — for the whole process, taken five times a message at
two round trips each, and every cascade and every node read queued behind it.
Inside it, reading a node's inputs was three round trips per input (an EXISTS
for `in`, then EXISTS and GET for the value), writing was two updates that a
single transaction already gives, and the version counters went one INCR at a
time.
Replaced with the atomic command that was always available: `get_present` is
one MGET and tells a missing key from one holding null, so the lock it used to
be read under bought nothing; value and timestamp land in one `update`, which
is a MULTI/EXEC; `increment_multi` pipelines the counters. `values()` — what
every websocket snapshot calls — is two reads whatever the message count
instead of two per message.
Beside that: every webhook did its blocking XADD on the asyncio event loop
(MQTT already used `to_thread`); the per-execution `NodeOutcome` was built and
validated even with no run watching; `_minute` built a tz-aware datetime per
event on the loop thread to key a dict, and now keys on an int; `move_due`
promoted delayed items one round trip each, every second; `FLOW_MAX_CASCADES`
makes the in-flight ceiling a setting rather than a constant.
`orjson` replaces stdlib json where a message pays for it — state, the
journal, the engine side of the worker pipe. `fluksio-worker` stays
dependency-free, and the run-cache digest stays on stdlib so no stored key is
invalidated. A non-finite number now stores as `null` rather than the bare
`NaN` that was never JSON.
Measured with `scripts/bench_engine.py` against a real Redis, 200 messages:
a five-node chain went from 43.9 to 103.1 msg/s with p50 latency 2110ms →
782ms and p95 3913ms → 1439ms; one source into twenty consumers went from 5.4
to 33.7 msg/s. In memory, twenty consumers went from 187 to 448 msg/s.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BpfSinyCBfjuieikyfMPbf
The limit was applied in `apply_outputs`, which the executor reaches after the
item is off the queue — so a subscriber told to publish every 15s still cost a
queue entry, a `cascade_started`, a run record and a walk of everything
reachable from it per inbound message. Seven relay nodes behind one inverter
ran 192 times a minute to publish six.
Two halves, matching the two shapes it takes:
`trigger()` now keeps a value whose every port is inside its window and
journals nothing at all. The window split came out of `_throttled` as a
read-only `_window_split`, so the question is asked the same way in both
places and the exact split is still made once, at claim time.
A cascade carries the names it actually published, and the wave runs only the
nodes something in that set feeds. A node whose triggering inputs were all
held back is completed without running, which frees its own consumers to be
judged the same way — the case where a node re-published 619 messages a minute
off inputs that changed six times. Redeliveries and emissions carry no such
set and still walk everything, since one has a half-finished wave to finish
and the other is the value already being in state.
Skipping a node can make one ready that the scheduling pass has already walked
past, so `submit_ready` runs to a fixpoint. That also closes the same latent
hole on the replay path, where a done-marker skip could strand a join with no
future outstanding to come back for it.
Measured with the new `scripts/bench_engine.py`, 500 messages through the
house's shape: a limited source went from 500 cascades / 3500 node runs /
5009 events to 1 / 7 / 19, publishing the same 8 values; an unlimited source
into limited relays took the node reading them from 500 runs to 1.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BpfSinyCBfjuieikyfMPbf
`RedisWorkQueue.stats` read XPENDING, which counts entries delivered to a
consumer and not yet acknowledged — work in progress. Entries sitting in the
stream undelivered were counted nowhere, so an engine hours behind reported
itself idle: on the house, `pending: 4` while the group's lag was 1554.
The group's own `lag` is the missing number. `backlog` now carries it on both
queues (`len(_items)` in memory), leads the health tile, and a sustained one
publishes `engine_degraded` from the timer thread — named with the flow most
of the waiting work belongs to, sampled from the undelivered tail, since that
is the actionable half. It is a summary problem rather than a /utils/health
503: a backlog should not restart the container.
Also drops the keyspace `scan_iter` `stats()` did per poll to count parked
items — it walked every state and idempotency key twice per ten seconds — for
a set the park/unpark path maintains.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BpfSinyCBfjuieikyfMPbf
`ADVISORY_ISSUES` moves next to `ValidationIssue` in pipeline.py, and the
model derives an `advisory` flag from its own code, so the distinction the
engine already made ships to the client instead of being re-guessed there.
The dock keeps its summary in `--destructive` only when a real fault is
among the issues and paints an advisory row `--muted-foreground`; the
canvas leaves advisories off a node's dot and border entirely, since node
status has three colours and no warning tier.
biome checks the generated `openapi.json`, which nothing formats since the
SDK script dropped its format pass — ignore it like the other generated
files.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013Gf7WaExcJ9bs3kfJXB3nK
A cache hit still replays no emissions — those values were the story of an
execution that is not happening — but the run they were recorded in is now
written on the row (`run_node.cached_from`), and the metrics endpoints read the
series back from there. So a reused run answers `run.metrics("train.loss")`
with the same points the run that trained did, rather than looking like a run
that produced no numbers at all. Pointed at rather than copied: a sweep of 500
reusing one frozen node would otherwise duplicate its curve 500 times.
That needed the cross-flow restore fixed first. The cache key has no flow in
it while the stored outputs are named for the flow that produced them, so
`quick.prepare` getting a hit from `train` wrote `train.dataset` into `quick`'s
state and the next node was called without its argument. One rule now covers
both halves: `requalify` reads a name owned by one flow as the same name in
another, applied to the restored outputs, to the node id behind the pointer,
and to the series names on the way out. Reuse across flows is kept.
Also: `@run:<id>.<output>` and a bare `sha256:` digest resolve on every input,
not only artifacts. Chaining a run's json config into the next one from a shell
meant pasting the whole object inline, and the CLI could not even send the
spelling — `_coerce` died in `json.loads` before the engine saw it. Both
spellings are reserved on every input now, `str` included, and `_from_run`
returns whatever the run's result holds rather than only a reference.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Dp9L6gakMVro1K2C5zdtBE
Two halves of the same gap: the CLI could start work but not show you any.
`fluksio status` draws the home screen's top half in a terminal — health and
what is wrong with it, every flow with its state and node count, and the
recent runs and failures under them. `--watch` keeps it there. Rich does the
drawing; it was already installed under fastapi's own CLI, and is named now
because a command depends on it.
`fluksio run` with no parameters at a terminal asks for them, one line per
declared input with its declared value in brackets — so Enter through the lot
is what running the defaults looks like, and an artifact input takes the
`@run:` spelling the engine now resolves. A scripted run is untouched: passing
any parameter, or piping the command, skips the questions, as does --defaults.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019V5bsYGNxcgPs4xXmTPx69
Four things the python SDK turned up, each fixed where every client sees it.
A key no port declares is now an error rather than a silent drop, on the
return, the yield and the emit alike — the contract the docs already stated.
The SDK reads literal yields at sync time, so a typo fails before anything
runs, and an emission of one fails the call rather than being logged where
nobody looks.
NaN and infinity are refused at the port. JSON cannot spell either, so one
that travelled came back as a 500, a socket frame that stopped the canvas, or
a metric batch the database dropped whole.
An artifact input takes `@run:<id>.<output>` or a bare digest, resolved on the
engine — so the CLI, the run dialog and a python caller mean the same thing,
and a sweep can pass one at all.
Node timeouts are off by default. The clock measured silence, which a training
node is full of, and remote workers had already stopped enforcing it — their
heartbeat reset it. Now a heartbeat proves the agent rather than the node,
ninety seconds of nothing fails the call either way, and the engine touches
work it is still running so a long node is not redelivered at sixty seconds.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019V5bsYGNxcgPs4xXmTPx69
A code node in a batch run is now fingerprinted by its source, its raw
settings and the values it reads — an artifact input counting as its digest,
which is what the content addressing was always for. A run that finds the key
restores what the earlier one returned and skips the node, recorded as
`cached`. The run history is the cache: `run_node.outputs` beside the
`cache_key` the schema already had, no second store. On for code nodes, never
for the built-in and connector types that have side effects; off per node with
`@node(cache=False)` and per run with `--no-cache`.
Emissions are not replayed on a hit, so a cached training node returns its
result without redrawing its curve. Recorded in NOTEPAD.md with the two other
deliberate limits.
`fluksio run --local` boots the real app in the command's own process and
drives it through its ASGI interface behind the ordinary client, so a run no
longer needs a `serve` terminal beside it — same data directory, same history,
and the cache carries between the two. It always waits, because the engine it
starts lives exactly as long as the command.
Also: `fluksio sweep --param lr=0.1,0.01` for the product of the lists,
`run --follow` for a run's numbers as they arrive, Ctrl-C cancelling a waited
run rather than abandoning it, coloured statuses on a terminal, and `name`
made optional on the metrics endpoint so a follower can ask for every series.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The workflow this serves: make a venv, install what you work with, then `pip
install fluksio` into the same one. Building a second environment beside it
was exactly wrong — the packages the nodes need are already here, and the
Modules screen was asking for them a second time.
`NODE_VENV=auto` (the default) adopts that venv. It declines in the three
cases where adopting would be wrong: `managed` says otherwise, a managed venv
already exists and may hold packages somebody installed on purpose, or the
engine is not running from a venv at all. The images set `managed`, since the
venv in them holds the app and nothing of anybody else's.
An adopted venv is never written to. `uv pip sync` makes a venv hold exactly
the manifest, so pointed at somebody's own environment it uninstalls their
work and the engine with it — `sync()` refuses outright and `reconcile()`
returns before it can be called at startup, which is where that would have
happened first. The Modules screen lists what is installed and drops its
editor; `pip` is how that environment changes.
`fluksio serve` now names the interpreter node code runs on, which is the
thing a data scientist most needs to know at that moment. `fluksio-worker`
already defaulted `--python` to its own interpreter, so a GPU box works the
same way — that was only ever undocumented.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012ue1tkFWB1bcGy3aWhCKpU
A dashboard is a wall panel somebody hangs in their own hallway, so it
now wears what they choose: a look, and a palette of their own colours.
Two complete component sets live under `Dashboard/ui/` — `glass`
(translucent panes over a slowly moving ground) and `material` (Material
3 tonal cards) — behind one prop contract. Every control's state,
keyboard and `aria-` live in `ui/core` and are shared, so the two sets
are the same dashboard drawn twice rather than two products: a set only
decides what a control looks like while doing it.
Four settings join the channel, each drivable by a flow like any other:
`look`, `palette`, `background` and `touch`. A palette is an ordered list
of hex colours — background, surface, primary, accent, text, then more
chart colours — pasted from a coolors.co link or typed, written onto the
canvas as the token variables everything already reads. Trailing roles
are derived, so three colours are a whole dashboard, and derived text is
held to AA rather than trusted (`theme.check.ts` measures it). A palette
also decides light or dark, since its first colour is the ground.
Widgets are measured against their own tile with container queries rather
than against the viewport, animate through `motion`, and can be drawn
without their title. The three reworks:
- a bar draws a row per reading, up to eight, each in the dashboard's own
data colours and each able to carry its own scale — replacing readings
nested in one fill, which could only ever share one colour and stop at
three. Documents written the old way are read as rows.
- a chart's range picker moved to a column down its right-hand edge, which
gives the plot back a whole row of a short tile.
- the colour wheel became a disc: hue is the angle and saturation the
distance from the middle, so a colour is one gesture rather than three,
with brightness on a slider beside it.
`index.css` and `lib/motion.ts` are untouched — the dashboard overrides
token *values* on its canvas, never the blocks the two repos share.
A stopped flow's nodes are built like any other flow's — being stopped
means having no subscriptions, schedules or webhooks, not being absent —
so a toggle only ever needed the lifecycle call and the gate that goes
with it. It was doing a whole-pipeline rebuild instead, which on a
populated installation is every node in every flow reconnecting.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01StpRc2C6au1WJ1EUU7fsfu
stroblmeandClaude Opus 5