serve: refuse a second engine for one data directory whatever port it was
asked for, using the pidfile and a token this directory signed. The check
runs before the database is touched and before the credential is written,
which is what left every later CLI call pointing at a dead port.
The terminal dashboard is three tabs (Overview, Runs, Logs) with the toolbar
following the focused pane, the engine's output goes to serve.log rather than
down a pipe, and closing the screen stops both reader threads so the prompt
comes back. It adopts a running engine on every start, so stop/start and
restart work on one it did not start, and a stop waits for the process to be
gone before the next start. Enrolment reports itself in the modal.
enroll: a new claim code replaces the pairing instead of being refused. The
code is redeemed before anything is written, mappings to a portal being left
are cleared, and a running engine redials when the stored enrolment changes.
runs: an engine re-queues the runs left `queued` by the one before it, and
`fluksio retry <id>` / `retry --group <sweep>` submits an interrupted run
again with the same inputs and group, recorded through Run.parent_id.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01U9BoNGq6V9MdRWAte7JBuC
Follows the portal: the noun is "instance" everywhere the app says it —
UI strings, CLI output, error details, docs and comments. The wire keys
(`instance_id`, `instance_token`) and the hub route this calls move with it.
An existing cloud.json is adopted rather than refused: without the key
alias the dataclass fails to parse, which the caller swallows and reads as
"never enrolled" instead of "reconnect".
`instance_key` on a node type becomes `target_key`. It means the outside
thing a node points at, which is a different sense of the word, and keeping
both would put two meanings of "instance" in one codebase.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015YrQnKV3bnQd4K342y8tKj
The worker already sent it and the log panel already got it; the failure
outcome kept the one-line error and the node's stdout and dropped the
rest, so reading a failure back meant reproducing it under `run --local`.
It rides in the node's logs now — no schema change, and the API row, the
run detail page and `RunHandle.failures` carry it as they are.
`_record_node` keeps the tail of the log cap rather than the head, so a
chatty node cannot push the traceback past it, and `fluksio run` prints
what each node said when a run does not end ok.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TXQv6KNyyvY7Z1etYTUUAd
`--format jsonl` existed, but `_cell` ran json.dumps at row-build time,
before a format was chosen — so a nested value was a string by then and
jsonl only re-escaped it, leaving a consumer against csv's 128KB field
limit either way. Stringifying moved to the csv writer, so csv is
byte-identical and jsonl carries json. The runs TUI followed, or a record
would draw as a Python repr.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KYM38KSb4V4v2T71eifnZv
`space` ticks runs on the serve dashboard's table and `enter` compares them:
one metric in braille, five distinct hues, and the table of what actually
differs under it. Both halves are routes that already existed — the browser's
own comparison endpoint for the curves, the runs export for the table, whose
input columns are filtered to the ones that vary.
The palette is hue rather than the web's lightness ramp on purpose: five steps
of one brand hue collapse to a single colour on a 16-colour tty.
The screen also subscribes to the engine's event bus over the same websocket a
browser uses, so a run that starts and finishes inside a tick is seen rather
than only recorded. `a` lists what a run left behind and fetches it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014SmyLMSqcJQ8tUL2qLj21s
The list read as a set of independent choices with two comments on it, one
of which was wrong: rich is not here "underneath fastapi's CLI" any more, it
is what textual is built on and what `fluksio status` imports directly.
Each line now says what imports it. The four that look redundant —
python-multipart, email-validator, jinja2, httpx — are also inside
`fastapi[standard]`, so they install nothing extra; they stay because the
code imports them directly and that should not rest on somebody else's
extra keeping its contents. email-validator in particular cannot move to
the server extra: `EmailStr` is on the user model, read on every start,
whether or not mail is ever sent.
Comments only. The resolved lock is byte-identical.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019Hra4ndWMCLU5F3KjUuVAc
A data-science environment installing fluksio waited for lxml, aiohttp and
the rest of a connector stack it has nothing to talk to. Outbound mail,
error reporting and the MQTT and InfluxDB clients moved to
`fluksio[server]`, which the image installs; each import is guarded and
names the extra. `tenacity` had no import site at all and is gone.
23 fewer packages and the compiled ones among them — a bare `pip install
fluksio` still serves, runs every python node, and registers the mqtt and
influxdb node types, which only need the library when one is actually
built. sentry-sdk arrives anyway underneath `fastapi[standard]`; what
changed there is that nothing of ours requires it.
The dev environment keeps every extra: the suite exercises the connectors
and strict mypy checks their call sites.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019Hra4ndWMCLU5F3KjUuVAc
`fluksio status` listed recent runs and recent failures with no time on
them, so a red line said nothing about whether it was from a minute ago or
last week. Both carry an age now, spelled the way a duration is, and the
runs listing gained one too. The fields were already on the wire.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019Hra4ndWMCLU5F3KjUuVAc
`fluksio sync dev` refused a one-file-per-directory layout: s1..s4 each
holding `study.py` stopped the walk with "two files would both import as
'study'". The suggested `__init__.py` per study directory fixed discovery
and broke the bare `from study import ...` a test beside it does. A file is
now named for its path under the directory being synced — `dev/s1/study.py`
imports as `s1.study`, the directories between being namespace packages —
so nothing collides and nothing has to be added. A file at the root keeps
its bare name, and the generated shim follows: `import_root` walks one
directory per dotted segment and lands on the same root.
The collision message stays for the spelling that can still reach it: two
files named on the command line, each rooted at its own directory.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019Hra4ndWMCLU5F3KjUuVAc
`save_artifact` had no download counterpart: the run detail listed a run's
files and nothing in `fluksio --help` fetched one. `fluksio artifacts RUN`
lists them, `fluksio artifacts RUN NAME` writes one — under the name the
node saved it as, since the message name is chosen for the graph. The run
detail now carries that filename, which it held in the table and did not
report.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019Hra4ndWMCLU5F3KjUuVAc
`export runs` dropped a `param.*` column whose value was constant across the
exported runs, so a downstream filter broke depending on which runs the
selection happened to hold. Every input the selection recorded is a column
now; `--params` still narrows it to a sweep's axis. The metrics default is
unchanged.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019Hra4ndWMCLU5F3KjUuVAc
`fluksio run --param lr=0.002` died with a bare JSONDecodeError: `--param`
is not a `run` flag, so it became an input named `param` whose value
`lr=0.002` was json-decoded. The name check ran after the coercion, so the
decode error always won. Names are now checked first, and a coercion error
is a SyncError naming the input and its type, the way `_ask_params` has
always done it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019Hra4ndWMCLU5F3KjUuVAc
Three things the one-folder-per-study layout ran into.
**Discovery walks down.** A plain directory is now walked all the way, so
`fluksio sync dev` finds `dev/s1_baseline/study.py` and naming each study is
no longer the price of the layout. Hidden directories, `__pycache__`,
`node_modules` and virtualenvs are left alone, and a package is taken whole.
Two files that would import under one module name are refused, naming both:
Python keeps one module per name, so the second would silently *be* the first
— and a node's generated body imports by that name, so a worker would run the
wrong study's code. The message says the fix, which is an `__init__.py` per
study directory. A module that raises while importing is now a sentence
naming the file rather than an importlib traceback.
**`run` and `sweep` sync downwards too**, so the flow is found from the
repository root without the sync-then-`--no-sync` two-step. A study that will
not import is a warning rather than a stopped run, since a walk meets every
study and a half-finished one two directories away is not this run's problem.
The upload was already a no-op for a flow nothing changed in, so what the walk
costs is import time — `--sync PATH` narrows it, and skipping unchanged
subtrees would need a cache keyed on file state that is deliberately not here.
**`serve` moves off a busy default port** — 8001, 8002, up to twenty — says
which it took, and writes that one into `client.json`. A port given with
`--port` still fails when it is taken, because naming one is asking for it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A9Hdrmf2cwNABCnE5x9UJa
Comparing the per-node digest against an engine that does not record one is
comparing against nothing, and reporting every node as changed on every sync
for ever — which is what a client newer than its engine did, since `NodeDef`
drops fields it has never heard of. A node is named now only when both sides
carry a digest, so a no-op sync is `unchanged` again and the signal one syncs
for is back.
That silence had also been the only sign of the mismatch, so sync now names
it: one line saying the engine stored no record of what a node's code reaches,
with both versions in it and what to run. Bumped to 0.1.6 — the digest changed
the stored document's shape, and a version that does not move makes two
different engines indistinguishable, which is the thing it was made
load-bearing for a day ago.
`— draft` was printed whenever there was simply nothing to publish, which
reads as work left unfinished. It is said only when a draft is genuinely
there, and `— published` when one was.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A9Hdrmf2cwNABCnE5x9UJa
`sync` follows each node function's imports through the project's own modules
— stopping at the standard library, at anything installed, and at Fluksio
itself, whose checkout would otherwise be most of every digest — and records
the file list with what it hashed to. The engine hashes those files again when
the run is claimed, so the fingerprint is live rather than a snapshot, and
falls back to what sync recorded when it cannot see them: a remote worker's
runs used to share one empty digest, and therefore one key.
Three things follow. Editing a helper a node calls into re-runs that node, as
before. Editing something the node never reaches no longer re-runs anything —
a notebook two directories away was invalidating every arm. And
`Run.code_digest` is now the hash of its nodes' digests, so it is neither
looser nor tighter than "the code behind these numbers", which is what makes
it worth joining an exported table on.
`sync` says so too: it compares the per-node digest against the stored one, so
a helper edit prints `train: updated (flow, fit)` instead of `unchanged`. The
digest is read when the document is built rather than when the flow is
declared, so a second `sync()` in one process sees an edit between them.
Also: `fluksio runs` shows only the inputs that differ from what the flow
declares, fitted to the terminal, so a flow taking a few kB of json no longer
wraps every line.
Every existing cache entry misses once — the fingerprint changed shape.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A9Hdrmf2cwNABCnE5x9UJa
Three things the first export pass got wrong for a real study.
**Dotted paths.** A node returns a record, not a scalar — the numbers arrive
inside `final_metrics` — so `--metrics final_metrics.train_loss` yielded an
empty column and `--metrics final_metrics` yielded the whole record in one
cell. Both sides of the wide table now take dotted paths, and the defaults
reach the same depth: every number a result carries is a column named by its
path, and inputs are compared leaf by leaf, so two configurations differing in
one field give that field as the axis rather than two blobs that are merely
not equal. Lists stay whole — a curve belongs in the long table.
**`--list`.** Metric names are flow-qualified, so `--name train_loss` matched
nothing and said only that. `fluksio export metrics --list` prints the names
the selection carries, and an empty export made with `--name` points at it.
**A version to compare.** The CLI ships ahead of the engine and a stale one
answered a flat 404 with nothing anywhere in the API to tell how old it was.
The engine reports `version` on `/observability/summary`, `fluksio status`
prints it, and a 404 from export now names both versions — or says "older"
when the field itself predates the engine. Bumped to 0.1.5, which is what
makes the number worth reading.
Also formats `flow/metrics.py`, which had been committed unformatted and was
the last `ruff format --check` failure.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A9Hdrmf2cwNABCnE5x9UJa
`fluksio export metrics` is the long table — a row per run, metric and step —
and `fluksio export runs` the wide one, a row per run with the inputs that
*vary* across the selection as columns beside its final numbers, status,
duration and the commit and digest of the code it ran. Both carry the run id
on every row, which is the join back to the run page and what makes an
exported file auditable. `Client.export_metrics`/`export_runs` answer the same
rows to a notebook.
The engine streams csv or jsonl from two routes declared above `/{run_id}`;
parquet is a client-side conversion behind the new `fluksio[parquet]` extra,
so nobody pays for pyarrow who does not want dtypes kept. The long export
reads each run through `_series`, so a cached node's curve comes with it, and
`--stride` thins each series rather than the concatenation of all of them.
Two things they needed on the way: `GET /runs` takes `?since=` and `?before=`,
so a long history pages by the last row's own timestamp instead of an offset
that shifts under it; and a read that reaches no engine now says so in half a
second rather than seven, because `runs`, `flavors`, `export` and an unwatched
`status` pass `retries=0`. Everything that submits keeps them.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A9Hdrmf2cwNABCnE5x9UJa
Concurrent runs sat at 4 whatever FLOW_MAX_CASCADES said: that setting bounds
cascades, and the run drivers read a hardcoded MAX_PARALLEL nobody could reach.
FLOW_MAX_RUNS is the knob they read now, --max-runs/--max-cascades/--max-workers
are the same three as flags on serve, and the engine says which numbers it
started with — which is the only way to tell that a settings file was read.
Events keep the run they happened in. The payload always carried it and the
persist path dropped it, so reading one run's failures meant filtering the
engine-wide list; a batch run's id reaches those events now too, since a run
has no journaled item to name itself by.
Also: a provisioner's 0 means "no deadline" rather than "cancel on the next
reconcile", and a command that reaches no engine says how to start one.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015sbYeYaVgYQqm1sbx7wPdL
Raw cpus and gpus are a property of the machines an installation has, so a node
written against a cluster quietly stops meaning anything when the cluster is
replaced. A node says "gpu-small" instead, and what that is stored here —
editable, and read again every time the node is built, so changing the flavor
changes what the next run gets.
Memory joins the schema properly (`ram`, in MB, accepting "2G"), along with
`duration_s` for how long a node is expected to take. That one is recorded and
shown and nothing else yet: a statement for whoever is planning around the node,
not a limit — the limit is still `timeout`.
A flavor and a number for the same thing is refused, compared by value so an
editor writing the whole object back with its defaults still round-trips. A name
nothing stores is refused at the save, which covers the canvas and `fluksio
sync` at once, and deleting one a node still asks for says which node.
Four sizes are seeded on an installation that has none, and never re-seeded:
re-adding one somebody deliberately removed is an argument nobody wins.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A6HeySA27EkGANZN95QySW
Three faults with one root: the stored body of a code-defined node is an
import shim, and nothing that mattered was ever read from the code itself.
- The run stamp could not identify what ran. The shim imports whatever is on
disk when the worker starts, and an uncommitted tree stamps <commit>-dirty
for every run it ever produces. Run.code_digest hashes the repository's .py
files, memoized on their stat state, and it is read again when the run is
actually claimed -- so a sweep queued for hours records the code each of its
runs executed, not the code that was there when it was submitted.
- The stage cache adopted code that was too new. The fingerprint hashed the
shim, which is invariant under any edit to the imported function or anything
it calls into, so a re-run was served from cache and answered without the
outputs the edit added. It now carries the repo digest and the node's
declared ports. Every fingerprint changes once, which invalidates the
existing cache; a canvas flow has no repository and keys as before.
- An interrupted sync looked like a hand-edited canvas. The engine answers a
new-node template for a node with no stored body, and the template carries
no marker, so the drift check read "somebody edited this" and demanded
--force -- for the one state that re-running the sync is the fix for.
NodeSource.missing states the fact, and sync skips those and reuses the
bodies it read instead of asking for each one twice.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A driver script died of one slow answer: httpx.ReadTimeout out of
RunHandle.refresh() with a 30 s read timeout and no retry anywhere, which
cost a sweep 78 of its 84 runs.
- Split the timeout (5 s connect, 120 s read): a wrong URL fails at once,
and a busy engine gets longer than the slowest thing it does on purpose
(a 60 s compile, a 15 s rebuild wait).
- Retry idempotent calls three times on a transport error or 502/503/504.
503 is the engine's own "ask again" — it is what RebuildBusy answers.
- Submit carries a key the engine stores with the run, so a retry after a
timeout returns that run instead of starting a second. A sweep keys every
entry, so a half-created one recreates only what is missing.
- wait() and --follow tolerate five failed polls in a row; a 404 still stops
at once, because that is an answer rather than a gap.
- CLI says "engine not answering" and names the run still on the engine,
instead of printing a traceback.
- runs: clamp the params column to 80 characters; events() takes the
flow/since/until the endpoint already had; RunHandle.failures answers
"what killed this run" from the run's own node rows.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
`POST /runs/flows/{name}` hardcoded `cause: "api"`, so every row in the
history claimed the same origin. The body now carries an optional `cause`,
closed to the values the column knows — the dashboard sends nothing and stays
"api", `fluksio run` says "cli", and the SDK client says "sdk".
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013Gf7WaExcJ9bs3kfJXB3nK
A cache hit still replays no emissions — those values were the story of an
execution that is not happening — but the run they were recorded in is now
written on the row (`run_node.cached_from`), and the metrics endpoints read the
series back from there. So a reused run answers `run.metrics("train.loss")`
with the same points the run that trained did, rather than looking like a run
that produced no numbers at all. Pointed at rather than copied: a sweep of 500
reusing one frozen node would otherwise duplicate its curve 500 times.
That needed the cross-flow restore fixed first. The cache key has no flow in
it while the stored outputs are named for the flow that produced them, so
`quick.prepare` getting a hit from `train` wrote `train.dataset` into `quick`'s
state and the next node was called without its argument. One rule now covers
both halves: `requalify` reads a name owned by one flow as the same name in
another, applied to the restored outputs, to the node id behind the pointer,
and to the series names on the way out. Reuse across flows is kept.
Also: `@run:<id>.<output>` and a bare `sha256:` digest resolve on every input,
not only artifacts. Chaining a run's json config into the next one from a shell
meant pasting the whole object inline, and the CLI could not even send the
spelling — `_coerce` died in `json.loads` before the engine saw it. Both
spellings are reserved on every input now, `str` included, and `_from_run`
returns whatever the run's result holds rather than only a reference.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Dp9L6gakMVro1K2C5zdtBE
Four things from a testing pass.
`fluksio serve` printed its own lines through the root logger, which has no
handler and falls back to `INFO:fluksio.cloud.connector:...` — beside uvicorn's
aligned output it reads like something went wrong. The engine's loggers and
alembic's now use uvicorn's own handler. Named rather than configuring the
root: httpx logs every portal call at INFO and none of that is printed today.
`fluksio enroll` writes its config from another process, so an engine already
serving never learned it had been paired. It now looks for one every few
seconds and dials when it appears. `load()` rather than `exists()`, or a file
that does not parse would be restarted forever.
`fluksio status` says where the installation stands with its portal — never
paired, linked, or paired and unreachable, which is the one worth acting on.
`--seed` and `--timeout` had no help text at all. Both say what they are for
now, and the docs say what a seed is actually for: recorded on the run, part of
its input digest, and passed to an input named `seed` when the flow declares
one, so the number a run is labelled with is the one the code drew from.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019V5bsYGNxcgPs4xXmTPx69
`runs --local` already exists for the reason status needs it: the flows and the
history are in this directory, and looking at them should not need a server.
Watching still does — an in-process engine is the command itself, so nothing
could change under it — and says so rather than sitting on a still frame.
Found setting up a sandbox that drives the SDK entirely through --local.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019V5bsYGNxcgPs4xXmTPx69
Two halves of the same gap: the CLI could start work but not show you any.
`fluksio status` draws the home screen's top half in a terminal — health and
what is wrong with it, every flow with its state and node count, and the
recent runs and failures under them. `--watch` keeps it there. Rich does the
drawing; it was already installed under fastapi's own CLI, and is named now
because a command depends on it.
`fluksio run` with no parameters at a terminal asks for them, one line per
declared input with its declared value in brackets — so Enter through the lot
is what running the defaults looks like, and an artifact input takes the
`@run:` spelling the engine now resolves. A scripted run is untouched: passing
any parameter, or piping the command, skips the questions, as does --defaults.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019V5bsYGNxcgPs4xXmTPx69
Four things the python SDK turned up, each fixed where every client sees it.
A key no port declares is now an error rather than a silent drop, on the
return, the yield and the emit alike — the contract the docs already stated.
The SDK reads literal yields at sync time, so a typo fails before anything
runs, and an emission of one fails the call rather than being logged where
nobody looks.
NaN and infinity are refused at the port. JSON cannot spell either, so one
that travelled came back as a 500, a socket frame that stopped the canvas, or
a metric batch the database dropped whole.
An artifact input takes `@run:<id>.<output>` or a bare digest, resolved on the
engine — so the CLI, the run dialog and a python caller mean the same thing,
and a sweep can pass one at all.
Node timeouts are off by default. The clock measured silence, which a training
node is full of, and remote workers had already stopped enforcing it — their
heartbeat reset it. Now a heartbeat proves the agent rather than the node,
ninety seconds of nothing fails the call either way, and the engine touches
work it is still running so a long node is not redelivered at sixty seconds.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019V5bsYGNxcgPs4xXmTPx69
A code node in a batch run is now fingerprinted by its source, its raw
settings and the values it reads — an artifact input counting as its digest,
which is what the content addressing was always for. A run that finds the key
restores what the earlier one returned and skips the node, recorded as
`cached`. The run history is the cache: `run_node.outputs` beside the
`cache_key` the schema already had, no second store. On for code nodes, never
for the built-in and connector types that have side effects; off per node with
`@node(cache=False)` and per run with `--no-cache`.
Emissions are not replayed on a hit, so a cached training node returns its
result without redrawing its curve. Recorded in NOTEPAD.md with the two other
deliberate limits.
`fluksio run --local` boots the real app in the command's own process and
drives it through its ASGI interface behind the ordinary client, so a run no
longer needs a `serve` terminal beside it — same data directory, same history,
and the cache carries between the two. It always waits, because the engine it
starts lives exactly as long as the command.
Also: `fluksio sweep --param lr=0.1,0.01` for the product of the lists,
`run --follow` for a run's numbers as they arrive, Ctrl-C cancelling a waited
run rather than abandoning it, coloured statuses on a terminal, and `name`
made optional on the metrics endpoint so a follower can ask for every series.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
**The portal link puts itself back up.** It already retried a connection that
raised, but a session that ended *cleanly* — a portal restarting, a proxy
closing an idle socket — returned normally and went straight back round the
loop with no wait at all, so an engine could spin against a portal that was
merely saying goodbye politely. Every ending now reconnects on a delay, and
the delay turns on whether the attempt got as far as attaching: one that stood
up and dropped is a network event and retries at once, one that never stood up
waits longer each time. Jittered, so a portal coming back is not met by every
installation it serves in the same instant. Ping timeouts are named rather
than defaulted, since they are what bounds how long a suspended laptop's dead
socket looks alive, and the keepalive task is awaited so the reason a link
went reaches the log instead of the garbage collector.
**`fluksio enroll <code>`** is the whole command now; hub.fluksio.com is the
default and `--portal` names another. The one command run before anything
works should not need two flags.
**`fluksio run` syncs first.** The reason a run exists is usually the edit
before it, so remembering to sync was remembering to do something the computer
could do — including the worker refresh, which is what makes an edit to your
own package take effect at all. `--no-sync` opts out for a tight loop.
That last one needed discovery fixed: it only ever looked at top-level `*.py`,
so a repository whose code is in a package — the ordinary shape — found
nothing from its own root. It now descends into the packages it holds.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012ue1tkFWB1bcGy3aWhCKpU
Two things a local install should not have asked for.
`fluksio serve` now signs you in. Logging in to your own machine was a
formality — the password was printed by the same process that would have
checked it, and the database it authenticates against sits in the directory
the token goes into — so `serve` mints the token itself and says where it put
it. `fluksio login` is left for an engine somewhere else.
And an installation is `.fluksio` beside the code, found the way `.git` is,
rather than one `~/.fluksio` for the machine. A repository with its own venv
was already getting its own engine; it now gets its own flows, run history and
token too, instead of three repositories sharing one database and fighting
over one port. `--global` asks for the shared one, `--data-dir` still names
any directory, and when both exist the banner says which you are looking at
and how to reach the other.
The directory ignores itself from within — a `.gitignore` of `*`, the way uv
writes one into `.venv` — because it holds a credential and a database, and
neither belongs in anybody's history. The token is written mode 600. A login
an older version wrote to ~/.config/fluksio is still read, so nothing that
worked stops working.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012ue1tkFWB1bcGy3aWhCKpU
A data scientist keeps their code where it is and decorates it: `@node`
declares a function's ports beside the function, `Flow(name, nodes=[...])`
says which of them make a flow, and `use(fn, wire=..., **settings)` rebinds
one for a single flow. `fluksio sync` uploads the document plus a generated
import shim per node, so the store still holds a complete, runnable,
git-versioned definition while the code it imports stays theirs.
`fluksio login|run|runs` and `flow.submit().wait()` are the client half, over
the run endpoints that already existed. Runs record the user repository's
commit beside the store's, so "what code produced this number" is answerable
on the side that now holds the code.
- `fluksio/sdk/`: ports, decorators, the flow builder and its checks, the shim
generator, an HTTP client and sync. Standard library only at import, so
`from fluksio import node` in a training script pulls in no engine.
- `FlowDef.origin` marks a flow code-defined; `Run.origin_commit` carries the
repository's commit; `POST /modules/refresh` retires the workers without an
install, which every sync calls — a worker holds the imported package in
memory, so an edit to it is invisible until the process goes.
- The canvas shows a generated body read-only and names the repository to edit
instead; a body edited there stops the next sync rather than being discarded.
- The worker's reporter carries inert `Port`, `node`, `use` and `Flow`, since
the shim imports a module whose first line declares them.
- `examples/myresearch` is the worked example, `make sync-example` uploads it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012ue1tkFWB1bcGy3aWhCKpU
stroblmeandClaude Opus 5