Concurrent runs sat at 4 whatever FLOW_MAX_CASCADES said: that setting bounds
cascades, and the run drivers read a hardcoded MAX_PARALLEL nobody could reach.
FLOW_MAX_RUNS is the knob they read now, --max-runs/--max-cascades/--max-workers
are the same three as flags on serve, and the engine says which numbers it
started with — which is the only way to tell that a settings file was read.
Events keep the run they happened in. The payload always carried it and the
persist path dropped it, so reading one run's failures meant filtering the
engine-wide list; a batch run's id reaches those events now too, since a run
has no journaled item to name itself by.
Also: a provisioner's 0 means "no deadline" rather than "cancel on the next
reconcile", and a command that reaches no engine says how to start one.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015sbYeYaVgYQqm1sbx7wPdL
Raw cpus and gpus are a property of the machines an installation has, so a node
written against a cluster quietly stops meaning anything when the cluster is
replaced. A node says "gpu-small" instead, and what that is stored here —
editable, and read again every time the node is built, so changing the flavor
changes what the next run gets.
Memory joins the schema properly (`ram`, in MB, accepting "2G"), along with
`duration_s` for how long a node is expected to take. That one is recorded and
shown and nothing else yet: a statement for whoever is planning around the node,
not a limit — the limit is still `timeout`.
A flavor and a number for the same thing is refused, compared by value so an
editor writing the whole object back with its defaults still round-trips. A name
nothing stores is refused at the save, which covers the canvas and `fluksio
sync` at once, and deleting one a node still asks for says which node.
Four sizes are seeded on an installation that has none, and never re-seeded:
re-adding one somebody deliberately removed is an argument nobody wins.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A6HeySA27EkGANZN95QySW
The engine answered "where does this node run" twice, in two ways that could
not see each other: a device sent it to a worker carrying that label, and
resources were counted against the engine's own cores. Declaring both meant the
second answer won and nothing was counted at all — which the data-science
getting-started page and the worked example both do.
One question now, in flow/placement.py: of every machine attached, which could
grant what this node asked for, and which of those has it free. The books move
onto each machine — one accountant per worker, built from the inventory it
reported — and the waiting moves above them, where one condition variable can
be woken by a release anywhere or by a worker attaching. Locks go one way:
placer, then a machine's books, never back.
So a node asking for a card now finds the box that has one, rather than being
clamped down to none and run here. When nothing can grant the ask at all it is
still cut down and run — a flow written on a cluster has to work on a laptop —
but the ceiling is one real machine now, since taking the largest of each
dimension separately can describe a machine nobody has.
Two things fixed on the way. A device on a connector node held every batch run
of its flow forever, waiting for a worker that could never run an entry point.
And `prefer` falling back to the engine skipped the books, so the fallback held
nothing.
The bench flow's node has taken a `params` argument that with_settings has not
forwarded for some time, so the benchmark could not run at all: 62 ms median
submit-to-result with this, against the 61 ms on record.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A6HeySA27EkGANZN95QySW
A run_artifact row is keyed by the message the bytes left on, and that was
also the only name it could answer with — so an `@run:` reference resolved
through the row was the same bytes under a name its producer never chose.
The row now records the file name beside the message name; rows written
before the column answer as they always did.
The fallback also checks the bytes are still in the store, which the bare
digest spelling beside it has always done. A missing blob now fails at
submit rather than in the middle of the run that wanted it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Three faults with one root: the stored body of a code-defined node is an
import shim, and nothing that mattered was ever read from the code itself.
- The run stamp could not identify what ran. The shim imports whatever is on
disk when the worker starts, and an uncommitted tree stamps <commit>-dirty
for every run it ever produces. Run.code_digest hashes the repository's .py
files, memoized on their stat state, and it is read again when the run is
actually claimed -- so a sweep queued for hours records the code each of its
runs executed, not the code that was there when it was submitted.
- The stage cache adopted code that was too new. The fingerprint hashed the
shim, which is invariant under any edit to the imported function or anything
it calls into, so a re-run was served from cache and answered without the
outputs the edit added. It now carries the repo digest and the node's
declared ports. Every fingerprint changes once, which invalidates the
existing cache; a canvas flow has no repository and keys as before.
- An interrupted sync looked like a hand-edited canvas. The engine answers a
new-node template for a node with no stored body, and the template carries
no marker, so the drift check read "somebody edited this" and demanded
--force -- for the one state that re-running the sync is the fix for.
NodeSource.missing states the fact, and sync skips those and reuses the
bodies it read instead of asking for each one twice.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A driver script died of one slow answer: httpx.ReadTimeout out of
RunHandle.refresh() with a 30 s read timeout and no retry anywhere, which
cost a sweep 78 of its 84 runs.
- Split the timeout (5 s connect, 120 s read): a wrong URL fails at once,
and a busy engine gets longer than the slowest thing it does on purpose
(a 60 s compile, a 15 s rebuild wait).
- Retry idempotent calls three times on a transport error or 502/503/504.
503 is the engine's own "ask again" — it is what RebuildBusy answers.
- Submit carries a key the engine stores with the run, so a retry after a
timeout returns that run instead of starting a second. A sweep keys every
entry, so a half-created one recreates only what is missing.
- wait() and --follow tolerate five failed polls in a row; a 404 still stops
at once, because that is an answer rather than a gap.
- CLI says "engine not answering" and names the run still on the engine,
instead of printing a traceback.
- runs: clamp the params column to 80 characters; events() takes the
flow/since/until the endpoint already had; RunHandle.failures answers
"what killed this run" from the run's own node rows.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
`POST /runs/flows/{name}` hardcoded `cause: "api"`, so every row in the
history claimed the same origin. The body now carries an optional `cause`,
closed to the values the column knows — the dashboard sends nothing and stays
"api", `fluksio run` says "cli", and the SDK client says "sdk".
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013Gf7WaExcJ9bs3kfJXB3nK
A cache hit still replays no emissions — those values were the story of an
execution that is not happening — but the run they were recorded in is now
written on the row (`run_node.cached_from`), and the metrics endpoints read the
series back from there. So a reused run answers `run.metrics("train.loss")`
with the same points the run that trained did, rather than looking like a run
that produced no numbers at all. Pointed at rather than copied: a sweep of 500
reusing one frozen node would otherwise duplicate its curve 500 times.
That needed the cross-flow restore fixed first. The cache key has no flow in
it while the stored outputs are named for the flow that produced them, so
`quick.prepare` getting a hit from `train` wrote `train.dataset` into `quick`'s
state and the next node was called without its argument. One rule now covers
both halves: `requalify` reads a name owned by one flow as the same name in
another, applied to the restored outputs, to the node id behind the pointer,
and to the series names on the way out. Reuse across flows is kept.
Also: `@run:<id>.<output>` and a bare `sha256:` digest resolve on every input,
not only artifacts. Chaining a run's json config into the next one from a shell
meant pasting the whole object inline, and the CLI could not even send the
spelling — `_coerce` died in `json.loads` before the engine saw it. Both
spellings are reserved on every input now, `str` included, and `_from_run`
returns whatever the run's result holds rather than only a reference.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Dp9L6gakMVro1K2C5zdtBE
A code node in a batch run is now fingerprinted by its source, its raw
settings and the values it reads — an artifact input counting as its digest,
which is what the content addressing was always for. A run that finds the key
restores what the earlier one returned and skips the node, recorded as
`cached`. The run history is the cache: `run_node.outputs` beside the
`cache_key` the schema already had, no second store. On for code nodes, never
for the built-in and connector types that have side effects; off per node with
`@node(cache=False)` and per run with `--no-cache`.
Emissions are not replayed on a hit, so a cached training node returns its
result without redrawing its curve. Recorded in NOTEPAD.md with the two other
deliberate limits.
`fluksio run --local` boots the real app in the command's own process and
drives it through its ASGI interface behind the ordinary client, so a run no
longer needs a `serve` terminal beside it — same data directory, same history,
and the cache carries between the two. It always waits, because the engine it
starts lives exactly as long as the command.
Also: `fluksio sweep --param lr=0.1,0.01` for the product of the lists,
`run --follow` for a run's numbers as they arrive, Ctrl-C cancelling a waited
run rather than abandoning it, coloured statuses on a terminal, and `name`
made optional on the metrics endpoint so a follower can ask for every series.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The gates have never gone green on the new runners. Three separate reasons:
- backend/Dockerfile shipped Python 3.10 while the code imports typing.Self
and datetime.UTC, so the container exited on import and the suite could not
even load its conftest. The image moves to 3.13 and the packages declare
>=3.12, which is the floor the tests actually pass on; ruff's target follows
and rewrites timezone.utc and asyncio.TimeoutError accordingly. Relocking
drops the 3.10 branch, which bumps FastAPI and so regenerates the SDK.
- frontend/README.md had no trailing newline and two dashboard widgets used
arbitrary text-[…] sizes. Both are em-relative on purpose, so they move to
the inline style the neighbouring ramp already uses.
- Every commit left its own run queued: without a concurrency group a runner
that was offline for a while works through a backlog nobody reads. A stack
that fails to come up now prints its logs before the teardown removes it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A data scientist keeps their code where it is and decorates it: `@node`
declares a function's ports beside the function, `Flow(name, nodes=[...])`
says which of them make a flow, and `use(fn, wire=..., **settings)` rebinds
one for a single flow. `fluksio sync` uploads the document plus a generated
import shim per node, so the store still holds a complete, runnable,
git-versioned definition while the code it imports stays theirs.
`fluksio login|run|runs` and `flow.submit().wait()` are the client half, over
the run endpoints that already existed. Runs record the user repository's
commit beside the store's, so "what code produced this number" is answerable
on the side that now holds the code.
- `fluksio/sdk/`: ports, decorators, the flow builder and its checks, the shim
generator, an HTTP client and sync. Standard library only at import, so
`from fluksio import node` in a training script pulls in no engine.
- `FlowDef.origin` marks a flow code-defined; `Run.origin_commit` carries the
repository's commit; `POST /modules/refresh` retires the workers without an
install, which every sync calls — a worker holds the imported package in
memory, so an edit to it is invisible until the process goes.
- The canvas shows a generated body read-only and names the repository to edit
instead; a body edited there stops the next sync rather than being discarded.
- The worker's reporter carries inert `Port`, `node`, `use` and `Flow`, since
the shim imports a module whose first line declares them.
- `examples/myresearch` is the worked example, `make sync-example` uploads it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012ue1tkFWB1bcGy3aWhCKpU
One process owns this database — the image has run a single uvicorn
worker for that reason since the four-engines bug — so a file beside the
flows is the honest shape for it, and it is what lets `fluksio serve`
need no infrastructure at all. Live values, node execution and the work
queue never came here anyway; what does is a rollup a minute at a time,
a row per cascade and the run history, and WAL keeps the readers going
while that one writer works.
DATA_DIR is now the one setting that moves everything an installation
keeps; the rest derive from it and the images still spell theirs out.
The schema is prepared in-process at startup, so the prestart service is
gone, and the ten Postgres-only revisions collapse into one portable
baseline.
Three things only worked because psycopg was casting for us: a token's
subject arriving as a string where the column is a UUID, `greatest`, and
`date_bin`. The timestamps needed a column type of their own — SQLite
stores no offset, and a naive datetime read back either raises against an
aware `now` or serialises as local time.
Postgres stays in the stack only for Umami, behind the analytics profile.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A wheel whose top-level module is `app` collides with anything else in a
user's venv, so the package that is about to be published takes the name
it is published under. Only the Python package moves; the repo, the
Docker WORKDIR and the compose project keep theirs.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
stroblmeandClaude Opus 5