32f751e1150a5ca3c8f5c6c6703d14c5bb7927c0
5
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  stroblmeandClaude Opus 5
|
d01a8dad37 |
Rename Installation to Instance
Follows the portal: the noun is "instance" everywhere the app says it — UI strings, CLI output, error details, docs and comments. The wire keys (`instance_id`, `instance_token`) and the hub route this calls move with it. An existing cloud.json is adopted rather than refused: without the key alias the dataclass fails to parse, which the caller swallows and reads as "never enrolled" instead of "reconnect". `instance_key` on a node type becomes `target_key`. It means the outside thing a node points at, which is a different sense of the word, and keeping both would put two meanings of "instance" in one codebase. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015YrQnKV3bnQd4K342y8tKj |
||
|
stroblmeandClaude Opus 5
|
57eace2226 |
Bound what the API accepts, and close the holes the audit found
**SQLite is the database, and now says so.** `metric_minute` and every run
table are written with `sqlalchemy.dialects.sqlite.insert(...)
.on_conflict_do_update` and with `max(a, b)`, neither of which another
dialect has — so pointing `DATABASE_URL` at Postgres migrated cleanly,
served, logged in, and then lost every observability flush into the
collector's hold buffer and failed every run. It refuses at startup
instead. (The Postgres in the compose stack is Umami's; the engine's own
database has been a file beside the flows since 2026-08-21.)
**Every integer query parameter is bounded.** The caps were written as
`min(limit, 500)`, which a negative walks straight through — `?limit=-1`
compiles to `LIMIT -1` and SQLite returns the whole table. Ten signatures,
now `Query(ge=…, le=…)`. `hours=0` still means an hour, which
`_window_hours` was already deliberate about.
**Exports are capped at 10 000 runs** and say so with `X-Truncated`. The
filters bounded a sensible request and nothing bounded an unfiltered one,
which read every row into memory before a byte was streamed. `_series`
resolves cached curves in two queries rather than a `Run` lookup and a
`RunMetric` query per restored node — a comparison of twenty runs was
calling that twenty times over.
**`PUT /artifacts` has a size limit** (`MAX_ARTIFACT_BYTES`, 2 GiB, 0 to
disable), checked against `Content-Length` and again against the stream for
a chunked body, and its writes moved off the event loop.
**`/observability/timeseries` takes `since`/`until`**, the same window
`/runs` and `/events` take, capped at 2000 points — `hours=720&bucket_s=60`
was 43 200 of them in one array. It is also what a dragged chart needs to
re-fetch at its own resolution rather than magnifying buckets it has.
**Composite indexes** for the three list screens: `run(flow, created_at)`
and `(status, created_at)`, `flow_run(flow, started_at)`,
`engine_event(type, ts)`. Every index was single-column, so SQLite picked
one and sorted the rest by hand. Verified against a copy of a live database
(250k `flow_run` rows): the planner takes all four.
**Redis clients have socket timeouts.** A Redis that stops answering
without closing the connection hung the caller until the kernel gave up —
including `/utils/health/`, whose job is to notice.
**The panels file is written under one lock.** `save_panels` and
`unpair_panel` are both read-modify-write, and a save that read before an
unpair wrote put the old nonce back — silently un-revoking a screen that
had just been unpaired. The nonce carry-forward was written to make that
impossible; the gap between its read and its write is where it happened.
**Startup releases what it acquired.** Everything past `event_bus.bind`
registers how to close itself and the `finally` walks that list backwards;
a failure part-way through used to reach none of the shutdown steps and
leave the worker pool's subprocesses and every background task behind —
under `--reload`, once per bad edit. `modules.reconcile` moved into the
background: `uv` gets five minutes twice over, the healthcheck allows
eighty seconds, and the autoheal restarted the container before it could
finish installing.
`delete_run` takes SQLite's write lock up front (`core.db.writing`) rather
than upgrading a deferred transaction and losing to whichever flush
committed in between. `modules.sync` is serialised — two applies mutated
one venv at once. The proxied-call and stream dicts are bounded, and a
reused id cancels its predecessor instead of dropping the reference.
Security, found in passing and small enough to fix here:
- **`/secrets/` required only a signed-in user.** The names alone say what
this installation talks to, and `PUT /{name}` takes any name, so any
account could overwrite the credential a flow authenticates with.
Superuser now — which `/search` already assumed and said so.
- **`POST /login/access-token` had no rate limit.** Argon2 is deliberately
expensive and the route is unauthenticated and runs in the shared
threadpool. Ten *failed* attempts per address per five minutes; a
successful sign-in spends nothing.
- **a password reset link worked repeatedly for 48 hours.** The token now
carries a digest of the password hash it was minted against, so it stops
verifying once it has set one. No table of spent tokens needed.
- **enrolment accepted `http://`**, sending the claim code and then this
installation's credential in clear. https, or a local address.
- the rate limiter read `request.client.host`, which behind Traefik is the
proxy — so every per-address limit was one global bucket and one caller
could lock out everyone. It reads the forwarded address, and its
bucket table is capped rather than growing one key per address forever.
- SMTP has a timeout and sends after the response, so an unreachable mail
host cannot pin a threadpool worker, and a reply's timing no longer says
whether the address exists.
Test suite: engine-written rows are cleared between modules. A `FlowRun`
left `running` by one module turned up in another's query. Per-test
rollback is not available here — the module-scoped `client` runs the real
lifespan and its collector and run service write through sessions of their
own — so this bounds it where the writes come from. Three consecutive
green runs, orders randomised.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01M6hPWS6YEbT1P8LxhhFb2T
|
||
|
stroblmeandClaude Fable 5
|
fea57064f9 |
Run node code on the venv Fluksio was installed into
The workflow this serves: make a venv, install what you work with, then `pip install fluksio` into the same one. Building a second environment beside it was exactly wrong — the packages the nodes need are already here, and the Modules screen was asking for them a second time. `NODE_VENV=auto` (the default) adopts that venv. It declines in the three cases where adopting would be wrong: `managed` says otherwise, a managed venv already exists and may hold packages somebody installed on purpose, or the engine is not running from a venv at all. The images set `managed`, since the venv in them holds the app and nothing of anybody else's. An adopted venv is never written to. `uv pip sync` makes a venv hold exactly the manifest, so pointed at somebody's own environment it uninstalls their work and the engine with it — `sync()` refuses outright and `reconcile()` returns before it can be called at startup, which is where that would have happened first. The Modules screen lists what is installed and drops its editor; `pip` is how that environment changes. `fluksio serve` now names the interpreter node code runs on, which is the thing a data scientist most needs to know at that moment. `fluksio-worker` already defaulted `--python` to its own interpreter, so a GPU box works the same way — that was only ever undocumented. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_012ue1tkFWB1bcGy3aWhCKpU |
||
|
stroblmeandClaude Opus 5
|
10b0ba9e49 |
Add the fluksio CLI: serve, enroll, worker
`pip install fluksio && fluksio serve` on a machine with no Docker, no database and no configuration — which is the case this is for: a node on a cluster where ports cannot be opened. It makes its data directory, its key and an admin account, prints the password once, and serves. Pairing is `fluksio enroll <code> --portal …`, doing what the Settings screen does through the same function, before the engine starts and without one running — a machine nobody can route to has no browser pointed at it either. The portal serves the dashboard, so nothing is served here. Two things had to give way. `fastapi[standard]` pulls a cloud CLI that wants sentry-sdk 2.x while we pinned below it — no pip resolution existed, so the pin is lifted, which the comment beside it had been waiting for and which also lets the Python cap go. And `uv` is now a dependency rather than something to find on PATH: the Modules screen is how a data scientist installs torch, and it was quietly falling back to the engine's own interpreter. The CLI imports nothing from the engine before it has set DATA_DIR — the settings are built on the first import of core.config, and reaching it early put the database in the working directory. There is a test for that now, because the failure is silent. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
stroblmeandClaude Opus 5
|
60d7ec81c0 |
Rename the import package app to fluksio
A wheel whose top-level module is `app` collides with anything else in a user's venv, so the package that is about to be published takes the name it is published under. Only the Python package moves; the repo, the Docker WORKDIR and the compose project keep theirs. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |